DocumentationHelp Center
Write signal data file log on target computer
Simulink Real-Time / Logging /
When you enable logging service, the File Log block logs the signal at its input port to the target computer file system.
expand all
S
Provides the signal data input for the file log.
Decimation
1
The decimation parameter value selects decimation for the samples captured in the file log.
decimation
Use real-time parameter tuning and data logging with Simulink® Real-Time™. After the example builds the model and downloads the real-time application, slrt_ex_param_tuning, to the target computer, the example executes multiple runs with the gain 'Gain1/Gain' changed (tuned) before each run. The gain sweeps from 0.1 to 0.7 in steps of 0.05.
slrt_ex_param_tuning
abort | disable | discard | enable | Enable File Log | import | list
abort
disable
discard
enable
import
list
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office
Get trial now