You can use the 2–port behavioral models for link budget analysis. In this library, frequency-selective components are described as either lumped and distributed elements or as S-parameters.
|LC Bandpass Pi
|Model LC bandpass pi network
|LC Bandpass Tee
|Model LC bandpass tee network
|LC Bandstop Pi
|Model LC bandstop pi network
|LC Bandstop Tee
|Model LC bandstop tee network
|LC Highpass Pi
|Model LC highpass pi network
|LC Highpass Tee
|Model LC highpass tee network
|LC Lowpass Pi
|Model LC lowpass pi network
|LC Lowpass Tee
|Model LC lowpass tee network
Series and Shunt Elements
|Coaxial Transmission Line
|Model coaxial transmission line
|Microstrip Transmission Line
|Model microstrip transmission line
|Parallel-Plate Transmission Line
|Model parallel-plate transmission line
|RLCG Transmission Line
|Model RLCG transmission line
|Two-Wire Transmission Line
|Model two-wire transmission line
|Coplanar Waveguide Transmission Line
|Model coplanar waveguide transmission line
- Create Complex Baseband-Equivalent Model
Describes how RF Blockset™ software uses the frequency-domain parameters of the RF blocks to create a baseband-equivalent model for time-domain simulation.
- Convert to and from Simulink Signals
Explains how the Input Port and Output Port convert Simulink® signals to and from the physical modeling environment during a simulation.
- Model Nonlinearity
Explains how to specify amplifier and mixer nonlinearity in a physical system.
- Model Noise
Explains how to model noise in a physical system.
- Model a Mixer Chain
Explains which frequencies RF Blockset Equivalent Baseband software models for each component when simulating a cascade that includes a mixer.
- Quadrature Mixers
Explains how to model upconversion and downconversion quadrature mixers.
- Model RF Components
Describes how to add and connect blocks in a Simulink model to represent RF components.