Convert a part of simulink model of my project to VHDL or Verilog code for FPGA

I have completed my direct power control for my wind energy conversion system, this is going to be implemented in hardware for this i want to generated Verilog or VHDL code of Direct Power Control to produce pulses to the Back to back converter, how to do this

Answer 1

[Aabha]

Hi @Kayalvizhi,

Most of the blocks in the Specialised Power Systems library in Simscape currently do not support code generation. You can enter the command ‘hdllib’ in the MATLAB command window. This command opens the 'Library Browser' in standalone mode, showing blocks that are compatible with HDL code generation.

If your model is built using blocks that are supported by ‘HDL Coder’, the Verilog/ VHDL codes can be generated by following these steps:

1. Ensure that the model is compatible with ‘HDL Coder’ by making sure all the blocks and datatypes used within the model are supported by ‘HDL Coder’. Isolate the part of the model that you want to convert to HDL code. In this case, this would be the control logic of ‘Direct Power Control’ that generates pulses for the back-to-back converter.
2. Generate HDL Code using the ‘HDL Workflow Advisor’. Please refer to the documentation link for more details on how to use the ‘HDL Workflow Advisor’: https://in.mathworks.com/help/releases/r2024b/hdlcoder/gs/basic-hdl-code-generation-with-the-workflow-advisor.html

I hope this helps.

Answer 2

[Kiran Kintali]

https://www.mathworks.com/help/hdlcoder/simscape-to-hdl.html

Simscape Hardware-in-the-Loop Workflow

Generate HDL code from Simscape models and deploy onto target hardware

Simscape™ Hardware-in-the-Loop (HIL) workflow enables you to generate HDL code for your Simscape plant models and deploy the generated code onto generic field-programmable gate array (FPGAs)