Software-Defined Radio with Zynq Using Simulink

Day 1 of 1

Model Communications System using Simulink

Objective: Model and simulate RF signal chain and communications algorithms.

• Overview of software-defined radio concepts and workflows
• Model and understand AD9361 RF Agile Transceiver using Simulink
• Simulate a communications system that includes a transmitter, AD9361 Transceiver, channel and Receiver (RF test environment)

Implement Radio I/O with ADI RF SOM and Simulink

Objective: Verify the operation of baseband transceiver algorithm using real data streamed from the AD9361 into MATLAB and Simulink.

• Overview of System object and hardware platform
• Set up ADI RF SOM as RF front-end for over-the-air signal capture or transmission
• Perform baseband processing in MATLAB and Simulink on captured receive signal
• Configure AD9361 registers and filters via System object
• Verify algorithm performance for real data versus simulated data

Prototype Deployment with Real-Time Data via HW/SW Co-Design

Objective: Generate HDL and C code targeting the programmable logic (PL) and processing system (PS) on the Zynq SoC to implement TX/RX.

• Overview of Zynq HW/SW co-design workflow
• Implement Transmitter and Receiver on PL/PS using HW/SW co-design workflow
• Configure software interface model
• Download generated code to the ARM processor and tune system parameters in real-time operation via Simulink
• Deploy a stand-alone system