Replay logged CAN FD messages
Vehicle Network Toolbox: CAN FD Communication
The CAN FD Replay block replays logged messages from a
.mat file to a
CAN network or to Simulink® as a bus signal. For more information on Simulink bus objects, see Composite Signals (Simulink). You need a CAN FD
Configuration block to replay to the network.
To replay messages logged in the MATLAB® Command window in your Simulink model, convert them into a compatible format using
vntslgate and save it to a separate file. For more information, see
Log and Replay CAN Messages.
You need a license for both Vehicle Network Toolbox™ and Simulink software to use this block.
When you replay logged messages, Simulink uses the original timestamps on the messages. When you replay to a network,
the timestamps correlate to real time, and when you replay to the Simulink input port it correlates to simulation time. If the timestamps in the messages
0, all messages are replayed as soon as the simulation starts,
because simulation time and real time will be ahead of the timestamps in the replayed
The CAN FD Replay block supports the use of Simulink Accelerator™ mode. Using this feature, you can speed up the execution of Simulink models. For more information on this feature, see Acceleration (Simulink).
The CAN FD Replay block supports the use of code generation along with the packNGo function to group required source code and dependent shared libraries. For more information, see Code Generation.
Vehicle Network Toolbox Simulink blocks allow you to generate code, enabling models containing these blocks to run in Accelerator, Rapid Accelerator, External, and Deployed modes.
You can use Vehicle Network Toolbox, Simulink Coder™, and Embedded Coder® software together to generate code on the host end that you can use to implement your model. For more information on code generation, see Build Process (Simulink Coder).
The block generates code with limited portability. The block
uses precompiled shared libraries, such as DLLs, to support I/O for
specific types of devices. With this block, you can use the
supported by Simulink
Coder to set up and manage the build
information for your models. The
packNGo (Simulink Coder) function
allows you to package model code and dependent shared libraries into
a zip file for deployment. You do not need MATLAB installed on
the target system, but the target system needs to be supported by MATLAB.
To set up
In this example,
gcs is the current model
that you want to build. Building the model creates a zip file with
the same name as model name. You can move this zip file to another
machine and there build the source code in the zip file to create
an executable which can run independent of MATLAB and Simulink.
The generated code compiles with both C and C++ compilers. For more
information, see Build Process Customization (Simulink Coder).
On Linux® platforms, you need to add the folder where you unzip the libraries to
the environment variable
Configure your CAN FD Configuration block before you configure the CAN FD Receive block parameters.
Specify the name and path of the file that contains logged CAN FD messages that you can replay. You can click Browse to browse to a file location and select the file.
Specify the variable saved in the MAT-file that holds the CAN FD message information.
Specify the number of times you want the message replayed in your model. You can
specify any positive integer, including
Inf continuously replays messages until simulation stops.
Specify if the model is replaying messages to the CAN network or an output port. If replaying to the CAN network, you must also specify a device. If replaying to the model through an output port, the output is a Simulink bus signal.
Select the device on the CAN network to replay messages to. This filed is
unavailable if you select
Input port for Replay message
Specify the sampling time of the block during simulation, which is the simulation time as described by the Simulink documentation. This value defines the frequency at which the CAN FD Replay block runs during simulation. If the block is inside a triggered subsystem or to inherit sample time, you can specify –1 as your sample time. You can also specify a MATLAB variable for sample time. The default value is 0.01 (in seconds).