nonlinear model in simulink and designing pid controller

10 views (last 30 days)
Hi guys
when I design for a nonlinear model in simulink a pid controller, and I want to run the simulink, it gives me bellow image.
(max step size is 0.2s , please go to configuration parameter and set "automatic solver parametric selection" to "none". although, I do that again it gives me this warning and when I see the scop, it does not give me a good result, it gives me just 0 in output instead of giving 2 things( output and input).
I attach also my slx file.
  3 Comments
azam ghamari
azam ghamari on 6 Sep 2019
hello
I have a pid controller. please see the file. and also I did it( with fixed time 0.001) and it gives me this figure. while when I use the variable step, it gives me totally different result!
please see the attached files.1.png

Sign in to comment.

Answers (1)

Rhea Chandy
Rhea Chandy on 29 Sep 2020
It is my understanding that you are having some difficulty in choosing a solver for your model.
The automatic solver recommends a fixed or variable step solver based on your maximum step size. If you’re not satisfied with the results from the auto solver, I suggest manually choosing the solver and comparing the different results with the tradeoffs. For example, decreasing the step size in a fixed-step solver will increase the accuracy of the results but increases the time required to simulate the system.
This guide can help you in choosing various solver for the dynamics of your model.

Products

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!