why there is incomplete return values from the method of a class in matlab?? help

I am trying to call function B in function A in the methods of a class. then function B will call function C. C return a struct to B , then B add some fields to that struct, then return the final struct to A. But the struct can not get the values from B, the struct only has values from C. why ??? thank you so much!!!

[Rik]

Can you give a MWE so we can reproduce this?

[Derrick Gao]

here is the three functions A B C: the return the value is a struct array. If it is a struct, it is fine I just checked.

{ function visiable_objectsIndex=Polar_Sweep_algorithm(obj,angleRange)
         %1 sort angle for event queue:
         %2. process the segments for status structure.
         Edge22=Calculate_polar_angle(obj)%!!!!get all the info of angle coordinate.
         obj.Edge2_=Edge22;
         for i=1:length(Edge22) % number of end points(or event points).
            Edge22(i)
            Edge22(i).thetaPoint
            polar_angle_endPoints(i,:)=Edge22(i).thetaPoint; %[x y height] format.
         end
         %pick up the objects that within the angleRange
         for i=1:length(polar_angle_endPoints)
             if(polar_angle_endPoints(i)>angleRange(1)||...
                        polar_angle_endPoints(i)<angleRange(2))
                    polar_angle_endPoints(i)=[];
             end
         end
         %sort as descend order.
         [angle,I]=sort(polar_angle_endPoints,'descend'); %polar angle of all the points in circle.
         %using the sweep algorithm, pick up the first Event Point.
          EventQueue=angle;
          currentAngle=EventQueue(1);

            %initial status structure.1st check the event point of
            %segment. this EP should be a starting point/a intersection
            %point.(3 type cases.)
            Index=I(1);
            pointType=Check_endPoint_type(obj,Edge2(Index));
            %get the status structure at current evetn queue.
            Status_structure=Generate_Status_structure(Edge2,currentAngle,pointType,Index);
            w=1;
            obj_count=1;
            while(length(EventQueue)~=0)
                w=w+1;
                EventQueue=EventQueue(w:end);
                currentAngle=EventQueue(1);
                Index=I(w);
                pointType=Check_endPoint_type(obj,Edge2(Index));
                Status_structure=obj.Generate_Status_structure(Edge2,...
                                              currentAngle,pointType,Index);
            %then find the closest distance between wall and Tx. control
            %the search angle!!!!
                visiable_objectsIndex(obj_count)=Status_structure(1);
                obj_count=obj_count+1;
            end
       end}
  {
     function Edge22=Calculate_polar_angle(obj)
          %set the Tx as origional reference points.!!!if you want to set
          %one specific point as reference point, let other point minus its x and y.
            Tx_loc=[obj.x_,obj.y_] %reference point.
  %         Edge2=obj.Edge2_(visible_obj_index);% all the visible objects in the box.
            Edge2=get_EdgeBundaryInsideCircle(obj);% change this !!!!!!!!!!!!
            %convert the edge vertice point into polar coordinate.
            size(Edge2);
            for i=1:length(Edge2)
               Edge=Edge2(i).point;  %pick out edge point.
               [theta,rho] = cart2pol(Edge(1)-Tx_loc(1),Edge(2)-Tx_loc(2));
               for i=1:length(theta)
                  if(theta<0)
                      theta=abs(theta)+pi;
                  end
               end
               assert(~isempty(theta),'the theta is equal to empty ');
               Edge2(i).thetaPoint=theta;
               Edge2(i).rhoPoint=rho;
            end
           %convert the angle of end points of line segments.
           for  i=1:length(Edge2)
               [a,b]=size(Edge2(i).segment);
                bundary_segment=Edge2(i).segment;% one edge point may have 2 segments
               for j=1:a
                   %!!!
                   %one end point in segment
                   [theta1_segment,rho1] = cart2pol(bundary_segment(j,1)-Tx_loc(1),...
                                      bundary_segment(j,2)-Tx_loc(2));
                   %another end point
                   [theta2_segment,rho2] = cart2pol(bundary_segment(j,3)-Tx_loc(1),...
                                      bundary_segment(j,4)-Tx_loc(2));
                   for i=1:length(theta1_segment)
                      if(theta1_segment<0)
                          theta1_segment=abs(theta1_segment)+pi;
                      end
                   end
                   for i=1:length(theta2_segment)
                      if(theta2_segment<0)
                          theta2_segment=abs(theta2_segment)+pi;
                      end
                   end
                  Edge2(i).theta11_segment(j)=theta1_segment;
                  Edge2(i).rho11(j)=rho1;
                  Edge2(i).theta22_segment(j)=theta2_segment;
                  Edge2(i).rho22(j)=rho2;
               end
           end
           Edge22=Edge2;
       end
  }
  {function [Edge2]=get_EdgeBundaryInsideCircle(obj)
               PointsIncircle=obj.PointsIncircle_;
               Edge=unique(PointsIncircle,'rows','stable');%remove the repeated points
               b=1; %count the buildings
               Edge1.building(b).store(1,:)=[Edge(1,1),Edge(1,2),Edge(1,3)];
               Edge2(1).point=[Edge(1,1),Edge(1,2),Edge(1,3)]%store the point of edge and height.

               Edge2(1).segment=[];
               for i=2:length(Edge) %consider different buildings.
                    m=1;
                   if(Edge(i,4)==Edge(i-1,4)&&Edge(i,3)==Edge(i-1,3)) %same building and same height.
                      %store the segment in format[ x1 y1 x2 y2 height] for
                      %each building seperately.
                      bundary_segment.building(b).store(i-1,:)=[Edge(i-1,1),Edge(i-1,2),...
                                  Edge(i,1),Edge(i,2),Edge(i,3)];%also store the height of walls.
                              Edge1.building(b).store(i,:)=[Edge(i,1),Edge(i,2),Edge(i,3)];

                      Edge2(i).bundary_segment2(m,:)=[Edge(i-1,1),Edge(i-1,2),... %store the total segment.
                                          Edge(i,1),Edge(i,2),Edge(i,3)]; 

                      Edge2(i).point=[Edge(i,1),Edge(i,2),Edge(i,3)];
                      %in this way, one edge point may could be in 2 segments!!!!
                      Edge2(i-1).segment=[Edge2(i-1).segment;Edge2(i).bundary_segment2(m,:)];
                      Edge2(i).segment=[Edge2(i).segment;Edge2(i).bundary_segment2(m,:)];

                   elseif(Edge(i,4)==Edge(i-1,4)&&Edge(i,3)~=Edge(i-1,3))%same building ,different hight
  %                      if(Edge(i,3)==Edge(i+1,3)) %look at it's next edge point
                          bundary_segment.building(b).store(i-1,:)=[Edge(i-1,1),Edge(i-1,2),...
                                              Edge(i,1),Edge(i,2),Edge(i,3)]; 

                          Edge1.building(b).store(i,:)=[Edge(i,1),Edge(i,2),Edge(i,3)];

                          Edge2(i).bundary_segment2(m,:)=[Edge(i-1,1),Edge(i-1,2),... %store the total segment.
                                   Edge(i,1),Edge(i,2),Edge(i,3)]; 
                          Edge2(i).point=[Edge(i,1),Edge(i,2),Edge(i,3)];
                          %one edge point may could be in 2 segments!!!!
                          Edge2(i-1).segment=[Edge2(i-1).segment;Edge2(i).bundary_segment2(m,:)];
                          Edge2(i).segment=[Edge2(i).segment;Edge2(i).bundary_segment2(m,:)];

%                      end
                 elseif(Edge(i,4)~=Edge(i-1,4)) %different building ID, start over, no relationship with before buildings.
                    b=b+1;% next building. new start!!
                    m=1;
                    bundary_segment.building(b).store(i,:)=[Edge(i,1),Edge(i,2),...
                                Edge(i+1,1),Edge(i+1,2),Edge(i,3)];%also store the height of walls.
                            Edge1.building(b).store(i,:)=[Edge(i,1),Edge(i,2),Edge(i,3)];
                    Edge2(i).bundary_segment2(m,:)=[Edge(i,1),Edge(i,2),... %store the total segment.
                                            Edge(i+1,1),Edge(i+1,2),Edge(i,3)]; 
                    Edge2(i).point=[Edge(i,1),Edge(i,2),Edge(i,3)];%loc of edge point.
                    %for a new start point, it only has one segment vector!!!!
                    Edge2(i).segment=[Edge2(i).segment;Edge2(i).bundary_segment2(m,:)];
                    m=m+1;
                 else
                     i;
                 end
             end
    end
}

[Derrick Gao]

my mistake!!!! it's not the code. sorry