When I am running Simulink model on raspberrypi , getting error as An unexpected error occurred while creating the Configuration Parameters Dialog. This might be caused by functions in your MATLAB path that shadow built-in MATLAB functions.

I downloaded support package for Raspberrypi 3 model B. It needs firmware to be boot in memory card, but while updating firmware , i am getting error as "No memory card found". So I downloaded raspbian os from https://www.raspberrypi.org/downloads/ and boot to the memory card. My communication is happening with Raspberrypi i.e. !ping 192.168.137.1

Pinging 192.168.137.1 with 32 bytes of data: Reply from 192.168.137.1: bytes=32 time<1ms TTL=128 Reply from 192.168.137.1: bytes=32 time<1ms TTL=128 Reply from 192.168.137.1: bytes=32 time<1ms TTL=128 Reply from 192.168.137.1: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.137.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms .

But my question is when i am running Simulink model on raspberrypi , getting error as An unexpected error occurred while creating the Configuration Parameters Dialog. This might be caused by functions in your MATLAB path that shadow built-in MATLAB functions.