How to sort table more than one variable with specified condition ?
2 views (last 30 days)
Show older comments
hi guys, can u tell me a different way to sort table by 2 variable columns which more simple than my method?
I want to sort jointTOS by its X and Z from minimum to maximum but X is the priority.
Here the code :
clear;
clc;
H = 5;
L = 15;
Ns = 2;
Nb = 1;
PortalHeight = H;
Bayspan = L;
NumberStory = Ns;
NumberBay = Nb;
% Variable1
h = [0.8,1.00,1.20,1.40,1.6,1.80];
% Variable2
Lss = [2.00,2.40,2.80,3.20,3.60,4.00];
% Variable3
Nss = [2,3,4];
% Definition
Var1HeightofTrussBeam = h;
Var2LengthSpecialSegment = Lss;
Var3NumberSpecialSegment = Nss;
% % Xbase = zeros(1,length(Totalvariant));
% % Zbase = zeros(1,length(Totalvariant));
% % Xcol = zeros(1,length(Totalvariant));
% % Zcol = zeros(1,length(Totalvariant));
% % Xos = zeros(1,length(Totalvariant));
% % Zos = zeros(1,length(Totalvariant));
% % Xss = zeros(1,length(Totalvariant));
% % Zss = zeros(1,length(Totalvariant));
% % X = zeros(1,length(Totalvariant));
% % Z = zeros(1,length(Totalvariant));
% % jointbase = zeros(1,length(Totalvariant));
% % jointcolumn = zeros(1,length(Totalvariant));
% % jointordinarysegment = zeros(1,length(Totalvariant));
% % jointtopordinarysegment = zeros(1,length(Totalvariant));
% % jointbottomordinarysegment = zeros(1,length(Totalvariant));
% % jointspecialsegment = zeros(1,length(Totalvariant));
% % jointtopspecialsegment = zeros(1,length(Totalvariant));
% % jointbottomspecialsegment = zeros(1,length(Totalvariant));
ijk = 0;
for i = 1:numel(h)
for j = 1:numel(Lss)
for k = 1:numel(Nss)
ijk = ijk+1;
Variantmodel{ijk,:} = table(ijk,h(i),Lss(j),Nss(k),'VariableNames',{'VariantID','Height','Length','Number'});
%% Cooridinate Point Base(base)
Xbase{ijk,:} = L*(0:NumberBay);
Zbase{ijk,:} = repelem(0,1,length(Xbase{ijk,:}));
%% Column(col)
Xcolumn = L*(0:NumberBay);
Zcolumn = repelem(H*(1:NumberStory),1,length(Xcolumn));
Xbotbeam = L*(0:NumberBay);
Zbotbeam = repelem((H*(1:NumberStory)-h(i)),1,length(Xbotbeam));
% replicate [X] to be the same size as [Z] for plotting:
Xcol{ijk,:} = repmat([Xcolumn,Xbotbeam],1,NumberStory);
Zcol{ijk,:} = [Zcolumn,Zbotbeam];
%% Cooridinate Point Ordinary Segment (os)
% calculate span length of ordinary segment
Los = (L-Lss(j))/2;
Nos = Los/h(i);
Nos = round(Nos);
los = Los/Nos;
totalspan{ijk,:} = los*Nos*2+Lss(j);
if totalspan{ijk,:} == 15.000
checkspan{ijk,:} = "correct span";
else
checkspan{ijk,:} = "span must be 15m";
end
% top and bottom joint of ordinary segment(os)
XTopOrdinarySegment = reshape([los*(1:Nos),(L/2+Lss(j)/2)+los*(0:Nos-1)].'+L*(0:(NumberBay-1)),1,[]);
XBottomOrdinarySegment = XTopOrdinarySegment;
ZTopOrdinarySegment = repelem(H*(1:NumberStory),1,2*Nos*NumberBay);
ZBottomOrdinarySegment = repelem(H*(1:NumberStory)-h(i),1,2*Nos*NumberBay);
% replicate [X] to be the same size as [Z] for plotting:
Xos{ijk,:} = repmat([XTopOrdinarySegment,XBottomOrdinarySegment],1,NumberStory);
Zos{ijk,:} = [ZTopOrdinarySegment,ZBottomOrdinarySegment];
%% Cooridinate Point Special Segment (ss)
% calculate span length of special segment
lss = Lss(j)/Nss(k);
% top and bottom joint of special segment(ss)
XTopSpecialSegment = reshape((lss*(0:Nss(k))+L/2-Lss(j)/2).'+L*(0:(NumberBay-1)),1,[]);
XBottomSpecialSegment = XTopSpecialSegment;
ZTopSpecialSegment = repelem(H*(1:NumberStory),1,length(XTopSpecialSegment));
ZBottomSpecialSegment = repelem(H*(1:NumberStory)-h(i),1,length(XBottomSpecialSegment));
% replicate [X] to be the same size as [Z] for plotting:
Xss{ijk,:} = repmat([XTopSpecialSegment,XBottomSpecialSegment],1,NumberStory);
Zss{ijk,:} = [ZTopSpecialSegment,ZBottomSpecialSegment];
%% Plot Cooridinate Point (X,Z)
X{ijk,:} = [Xbase{ijk,:},Xcol{ijk,:},Xos{ijk,:},Xss{ijk,:}];
Z{ijk,:} = [Zbase{ijk,:},Zcol{ijk,:},Zos{ijk,:},Zss{ijk,:}];
scatter(X{ijk,:},Z{ijk,:},'filled'),grid on
%check angle
tangent = (Lss(j)/Nss(k))/h(i);
anglespecialsegment(ijk) = atand(tangent);
%% Name the Joint
jointbase{ijk} = table((1:numel(Xbase{ijk,:}))',Xbase{ijk,:}',Zbase{ijk,:}','VariableNames',{'ID','X','Z'});
jointcolumn{ijk} = table((max(jointbase{ijk}.ID)+1:numel(Xcol{ijk,:})+max(jointbase{ijk}.ID))',Xcol{ijk,:}',Zcol{ijk,:}','VariableNames',{'ID','X','Z'});
jointordinarysegment{ijk} = table((max(jointcolumn{ijk}.ID)+1:numel(Xos{ijk,:})+max(jointcolumn{ijk}.ID))',Xos{ijk,:}',Zos{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zcolumn),:);
jointbottomordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zbotbeam),:);
jointspecialsegment{ijk} = table((max(jointbottomordinarysegment{ijk}.ID)+1:numel(Xss{ijk,:})+max(jointbottomordinarysegment{ijk}.ID))',Xss{ijk,:}',Zss{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zcolumn),:);
jointbottomspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zbotbeam),:);
end
end
end
% Verify Variants Which Passed the Angle Requirement
tablecheck = table((1:numel(anglespecialsegment))',totalspan,anglespecialsegment','VariableNames',{'VariantID','Total Span','Angle'});
VariantIDPassed = tablecheck.VariantID(tablecheck.Angle>=30 & tablecheck.Angle<=60);
jointbase = table((1:numel(jointbase))',jointbase','VariableNames',{'VariantID','Joint Base'});
jointbase = jointbase(ismember(jointbase.VariantID,VariantIDPassed),:);
jointcolumn = table((1:numel(jointcolumn))',jointcolumn','VariableNames',{'VariantID','Joint Column'});
jointcolumn = jointcolumn(ismember(jointcolumn.VariantID,VariantIDPassed),:);
jointtopordinarysegment = table((1:numel(jointtopordinarysegment))',jointtopordinarysegment','VariableNames',{'VariantID','Joint Top Ordinary Segment'});
jointtopordinarysegment = jointtopordinarysegment(ismember(jointtopordinarysegment.VariantID,VariantIDPassed),:);
jointbottomordinarysegment = table((1:numel(jointbottomordinarysegment))',jointbottomordinarysegment','VariableNames',{'VariantID','Joint Bottom Ordinary Segment'});
jointbottomordinarysegment = jointbottomordinarysegment(ismember(jointbottomordinarysegment.VariantID,VariantIDPassed),:);
jointtopspecialsegment = table((1:numel(jointtopspecialsegment))',jointtopspecialsegment','VariableNames',{'VariantID','Joint Top Special Segment'});
jointtopspecialsegment = jointtopspecialsegment(ismember(jointtopspecialsegment.VariantID,VariantIDPassed),:);
jointbottomspecialsegment = table((1:numel(jointbottomspecialsegment))',jointbottomspecialsegment','VariableNames',{'VariantID','Joint Bottom Special Segment'});
jointbottomspecialsegment = jointbottomspecialsegment(ismember(jointbottomspecialsegment.VariantID,VariantIDPassed),:);
%% Name the Frame
% column
for i = 1:height(VariantIDPassed)
jointIcolumn = 0;
jointJcolumn = 0;
jointcolumnnew{i,:} = jointcolumn.("Joint Column"){i}(ismember(jointcolumn.("Joint Column"){i}.Z,Zcolumn),:);
jointcolumnnew{i,:} = vertcat(jointbase.("Joint Base"){i},jointcolumnnew{i});
for j = 1:height(jointcolumnnew{i,1})-2
jointIcolumn(j) = jointcolumnnew{i,1}.ID(j);
jointJcolumn(j) = jointcolumnnew{i,1}.ID(j+2);
end
framecolumn{i,:} = table((1:j)',jointIcolumn',jointJcolumn','VariableNames',{'Frame ID','JointI','JoinJ'});
end
% top ordinary segment (TOS)
for i = 1:height(VariantIDPassed)
endTOS{i,:} = jointcolumn.("Joint Column"){i}(ismember(jointcolumn.("Joint Column"){i}.Z,Zcolumn),:);
jointTOS{i,:} = vertcat(jointtopordinarysegment.("Joint Top Ordinary Segment"){i},endTOS{i});
jointTOSnew1{i,:} = sortrows(jointTOS{i}(ismember(jointTOS{i}.Z,5),:),2);
jointTOSnew2{i,:} = sortrows(jointTOS{i}(ismember(jointTOS{i}.Z,10),:),2);
jointTOSnew{i,:} = vertcat(jointTOSnew1{i},jointTOSnew2{i});
end
here the resut that i want :
jointTOSnew{1}
0 Comments
Answers (1)
Steven Lord
on 21 Apr 2024
See the "Sort Rows of Table by Variables" example on the documentation page for the sortrows function.
0 Comments
See Also
Categories
Find more on Matrices and Arrays in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!