Clear Filters
Clear Filters

Pulse-Doppler Radar Using Xilinx RFSoC Device: Expected Result

1 view (last 30 days)
I complete all implementation steps of the Pulse-Doppler Radar Using Xilinx RFSoC Device. Nothing was detected in the detection map plot. It stayed blue. So what is the expected result.

Answers (1)

Sarthak
Sarthak on 30 Aug 2023
Hi Ahmed,
As per my understanding, the mentioned example shows how to integrate the pulse-Doppler radar system on a Xilinx ZCU111 evaluation board using the SoC Blockset product and how to verify the design in simulation and on hardware.
The expected result of the Pulse-Doppler Radar using Xilinx RFSoC device is to detect and display objects or targets in the detection map plot. The detection map plot should show different colors or intensity levels to represent the presence and velocity of detected objects.
If the detection map plot stays blue and no objects are detected, it indicates that the radar system did not detect any targets during the measurement.
Please go over the implementation process to make sure you followed all the necessary steps precisely and to address any potential problems. Additionally, confirm that you are utilizing hardware platforms that are supported and system specifications and configurations are as mentioned.

Tags

Products


Release

R2023a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!