Pulse-Doppler Radar Using Xilinx RFSoC Device: HDL Workflow Advisor, setting 'AllowUnsu​pportedToo​lVersion' to 'true'.

I am trying to run Pulse-Doppler Radar Using Xilinx RFSoC Device example on the Xilinx ZCU111 board. I downloaded all the required toolboxes and add-ons. My OS is Ubuntu 22.04.3 LTS, and the Xilinx Vivado version I used is 2022.2. I followed these instructions to implement the model. I am stuck on the build step in SoC Builder. I got the following error.

I open the HDL Workflow Advisor, and I set the 'AllowUnsupportedToolVersion' to 'true'. When I re-run the script, nothing changed.

Would you please help me to solve this?

Answer 1

[Tom Mealey]

Hi Ahmed,

You will need to use the compatible version of Vivado, which for R2023a is 2022.1:

https://www.mathworks.com/help/supportpkg/xilinxsoc/ug/supported-third-party-tools-and-hardware.html

-Tom

[Ahmed]

Thank you very much. I passed that error, but another one emerges. How can I solve this?

I tried to rerun the hardware setup and rebuild it again by using SoC builder, but the outcome is the same.

[Tom Mealey]

Can you confirm that you're using the SD card image for ZCU111 from the "SoC Blockset Support Package for Xilinx Devices"?

[Ahmed]

SD card image for ZCU111 was created flawlessly via the hardware setup section. It generated the dtb files also. I can connect to the ZCU111 which uses the generated image.

The sd card image:

[Ahmed]

Also, I tried to update the embedded Linux to determine whether something is missing.

[Tom Mealey]

Hi Ahmed,

Looks like you have everything set up correctly, this could be a bug on our end. Please reach out to technical support to try to get this resolved.

https://www.mathworks.com/support/contact_us.html

-Tom