How can I read analog COS and SIN voltages with LAUNCHXL-F28069M?
1 view (last 30 days)
Show older comments
I am trying to excite and evaluate a resolver with a Launchpad F28069M in combination with the TMDSRSLVR C2000 Resolver to Digital Conversion Kit.
I am targeting the set up / hardware connection described in:
https://de.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/hardware-connections-c2000.html
I am facing the following problem: I want to read in the SIN and COS voltages using the ADC. Apparently, the voltages received are in the range of +/- 0.5V while the ADC voltage range is 0-3V. Hence, the digital signals are cut off at "0" so that proper angle/speed calculation is not possible. The example simulink model shown in
https://de.mathworks.com/help/mcb/gs/monitoring-resolver-using-serial-communication.html?searchHighlight=monitor%20resolver&s_tid=srchtitle_monitor%20resolver_1
implies that the resolver evaluation is possible. Can anyone help me, how proper COS/SIN reading can be achieved?
Many thanks
Nils
0 Comments
Answers (1)
Mukul Choudhury
on 9 Aug 2023
Edited: Mukul Choudhury
on 9 Aug 2023
Hi,
The example mentioned by you uses the TI TMDSRSLVR - Resolver EVM kit. This resolver uses a level shifter and a gain amplifier using Texas Instruments TLV2772 to fit the reolver signals within the ADC range.
Due to the level shifter, the reolver signals which are fed to the ADC are in the ramge of 0- 3.3 V.
Please refer to the following lik for more details:
Hope this helps.
Regards,
Mukul
0 Comments
See Also
Categories
Find more on Instrument Connection and Communication in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!