generating a half wave sinusoid using Simulink
21 views (last 30 days)
Show older comments
I am pretty bad at using Simulink and have tried for days to obtain a half wave sinusoid of the following equation: I(t)=360sin(pi*t/0.4), 0<=t<=0.4 I(t)=0, 0.4<t<=1
I just used a Sine block of amplitude=360 and frequency of 7.85 rad/sec together with a pulse generator block and multiply them together.
Any suggestions? I want to get the one in blue but I only got the one in yellow. :(
0 Comments
Answers (1)
Rick Rosson
on 5 Oct 2014
Edited: Rick Rosson
on 5 Oct 2014
Try feeding the output of the Sine Wave block to the input of a Saturation block. Set the lower limit to 0 and the upper limit to inf.
2 Comments
Rick Rosson
on 5 Oct 2014
Edited: Rick Rosson
on 6 Oct 2014
Please check the Max step size parameter in the Solver Pane. My guess is that it is set either to auto or to a value that is too large relative to the period of the sine wave. With the sine wave having a period of 0.8 seconds, I would recommend that you set the max step size to 0.02 or even 0.01 seconds so that you will have high enough time resolution to represent the sine wave as a smooth curve.
See Also
Categories
Find more on Sources in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!