Third-Party Calibration Support
Measurement and calibration by using Vector CANape® and ETAS® Inca
To apply received calibration data and stream measured signal values, use third-party software such as Vector CANape and ETAS Inca.
Model Settings
Functions
coder.asap2.export | Generate ASAP2 (A2L) file according to ASAM MCD-2 MC standards |
updateASAP2 | Pack the ASAP2 file into application (Since R2022b) |
extractASAP2 | Extract generated A2L file from real-time application file |
Topics
Preparation
- Calibrate Real-Time Application
Use Vector CANape and ETAS Inca to calibrate real-time applications. - Prepare ASAP2 Data Description File
Prepare a standard-format data description file for use by Vector CANape and ETAS Inca.
Vector CANape
- Calibrate Parameters with Vector CANape
Use Vector CANape and ASAP2 files to calibrate a real-time application. - Vector CANape Limitations
Learn about Vector CANape features that Simulink® Real-Time™ software does not support. - Troubleshoot Vector CANape Operation
Investigate issues that can occur when Vector CANape controls a real-time application.
ETAS Inca
- Calibrate Parameters with ETAS Inca
Use ETAS Inca and ASAP2 files to calibrate a real-time application. - ETAS Inca Limitations
Learn about ETAS Inca features that Simulink Real-Time software does not support. - Troubleshoot ETAS Inca Operation
Investigate issues that can occur when ETAS Inca controls a real-time application.
Troubleshooting
Troubleshooting in Simulink Real-Time
Troubleshoot problems that you encounter while using the Simulink Real-Time product
