Main Content

Bit Unpacking

Deconstruct data frames

  • Library:
  • Simulink Real-Time / Utilities

  • Bit Unpacking block


The Bit Unpacking block extracts data frames. Its input port is typically connected to an output port of a Receive block or Digital Input block.

The block has one input port, which represents the data frame entity from which the signals are extracted and leaving the block at its output ports. The number of output ports and the data type of each output port depend on the settings in the block dialog box.

Bit Unpack Four Bytes

This example shows how to configure a Bit Upacking block to:

  • Receive a 32-bit word as input by using input port data type uint32.

  • Unpack four 8-bit words (bytes) from the input data by using a bit pattern.

  • Send four 8-bit words as output by using the output data type uint8.

Image of Bit Unpacking block parameters dialog box

After configuring the block parameters, the Bit Upacking block appears as shown.

Image of bit unpacking block


expand all

Specify bit patterns. The data type must be a MATLAB® cell array vector. The number of elements in the cell array define the number of input ports shown by this block instance. The cell array elements must be of type double array and define the position of each bit of the incoming value (data typed input port) in the outgoing double value (data frame). From a data type perspective, the block behaves like a Sink block. The Input port (packed) data types specify the data type of the input port.

Programmatic Use

Block Parameter: BitPatterns

From the list, select an input port (packed) data type.

Programmatic Use

Block Parameter: PackDataType

Specify the dimensions of the input port (packed). Enter this value as a vector. Specify the size of the port by using a format compatible with the MATLAB size command.

Programmatic Use

Block Parameter: PackDataSize

The output ports (packed) can be of an arbitrary data type. The number of elements in the cell array define the number of output ports shown by this block instance. The data types are:

  • double

  • single

  • int8

  • uint8

  • int16

  • uint16

  • int32

  • uint32

  • boolean

Programmatic Use

Block Parameter: UnpackDataTypes

Specify the dimensions of each output port (unpacked). Enter this value as a cell array of vector sizes.

Programmatic Use

Block Parameter: UnpackDataSizes

Select this check box to enable sign extension. If you select this check box and unpack the data frame into a signed type (int8, int16, or int32), the block performs sign extension. For example, if the bit pattern is [0:4], and the data type is int8, you are extracting 5 bits into an 8-bit wide signed type. In this case, bits 5, 6, and 7 are the same as bit 4, resulting in sign extension. This functionality enables you to pack and unpack negative numbers without losing precision.

Programmatic Use

Block Parameter: SignExtend

Model Examples

Version History

Introduced in R2006a