Main Content

Configure Input and Output Ports for Bit Packing and Unpacking

This example uses:

Open Script

This example shows how to configure Bit Packing blocks and Bit Unpacking blocks.

Open Model

The model uses Bit Packing, Bit Unpacking, and Display blocks to show how to use the input and output port configuration syntax. Open the model and double-click blocks to view the configuration.

model = 'slrt_ex_bit_pack_unpack';
open_system(model);

Settings for Bit Packing and Bit Unpacking Blocks

To demonstrate the syntax for configuring block input and output ports, the model slrt_ex_bit_pack_unpack has a set of Bit Packing blocks and Bit Unpacking blocks that use these settings:

slrt_ex_bit_pack_unpack/Bit Packing

  • Bit patterns: {[0]}

  • Output port (packed) data type: uint32

  • Outpupt port (packed) dimensions: [1]

slrt_ex_bit_pack_unpack/Bit Packing1

  • Bit patterns: {[1]}

  • Output port (packed) data type: uint32

  • Outpupt port (packed) dimensions: [1]

slrt_ex_bit_pack_unpack/Bit Packing2

  • Bit patterns: {[16:18]}

  • Output port (packed) data type: uint32

  • Outpupt port (packed) dimensions: [1]

slrt_ex_bit_pack_unpack/Bit Packing3

  • Bit patterns: {0, 1, [16:18]}

  • Output port (packed) data type: uint32

  • Outpupt port (packed) dimensions: [1]

slrt_ex_bit_pack_unpack/Bit Packing4

  • Bit patterns: {[32:34]}

  • Output port (packed) data type: uint32

  • Outpupt port (packed) dimensions: [2]

slrt_ex_bit_pack_unpack/Bit Unpacking

  • Bit patterns: {0, 1, [16:18]}

  • Input port (packed) data type: uint32

  • Inpupt port (packed) dimensions: [1]

  • Ouptut port (unpacked) data types (cell array): {'uint8','uint16', 'uint32'}

  • Output port (unpacked) dimensions (cell array): {1,1,1}

  • Sign extended: 'On'

slrt_ex_bit_pack_unpack/Bit Unacking1

  • Bit patterns: {[32:34]}

  • Input port (packed) data type: uint32

  • Inpupt port (packed) dimensions: [2]

  • Ouptut port (unpacked) data types (cell array): {'uint8'}

  • Output port (unpacked) dimensions (cell array): {1}

  • Sign extended: 'On'

Build Model and Run Real-Time Application

To show the unpacked output in the Display blocks, build the model and run the real-time application.

evalc('slbuild(model)');
tg = slrealtime;
load(tg,model);
start(tg);
pause(10);
stop(tg);

Close Model

bdclose('all');