Main Content

This topic shows how to select parameters of a Simulink^{®} model for design exploration in the **Sensitivity Analyzer**. After
you select the parameters, you generate parameter samples
by varying the parameter values in a specific range, and evaluate your design
requirements for each combination of parameter values.

The software can only evaluate variables that are in use by the model. Create
variables in the MATLAB^{®} or model workspace, and specify your Simulink model or block parameters using these variables. If you have already
specified model parameters as variables, Select Parameters for Design
Exploration.

In this figure, the **Gain** parameter of a Gain
block is specified as a numerical value.

To evaluate design requirements using the **Gain** parameter,
specify it as variable `gain1`

:

Create the variable

`gain1`

in one of the following ways:Add the variables to the model workspace, and specify initial values.

Write initialization code in the

**PreloadFcn**callback of the model. For more information, see Model Callbacks.gain1 = 0.8

Specify the block parameter as variable

`gain1`

in the Gain block dialog box.

You can now select `gain1`

for evaluation. See, Select Parameters for Design Exploration.

In the **Sensitivity Analyzer**, in the **Sensitivity
Analysis** tab, click **Select Parameters** to open
the Select model variables dialog box.

Use this dialog box to select parameters to vary. The table lists the variables that the model uses to set block parameter values. The variables can reside in the model workspace, the base workspace, or a data dictionary.

Select variables by
clicking the check box next to each variable. If your model contains
many variables, filter the list by typing in the **Filter
by variable name** field. The **Used By** column
lists all blocks in the model that use the variable. When a variable
is used in more than one block, all blocks are listed. To highlight
blocks in the model that use the variable, click the block name.

The variables that you select must have a numeric value
that uses the data type `double`

. If the value of
a variable is not a `double`

number, use these techniques:

To select a single element or a subset of a matrix or array variable, click

**Specify expression indexing if necessary**.Enter an expression such as

`myArray(2)`

, which selects the second element of an array variable`myArray`

.After you type the expression, press the

**Enter**key to add the variable to the list of model variables.To use a variable of a numeric data type other than

`double`

, convert the variable to a`Simulink.Parameter`

object, which separates a parameter value from its data type. Set the`Value`

property to a default`double`

number, and use the`DataType`

property to control the data type.To use the value of a

`Simulink.Parameter`

object, specify the`Value`

property. Enter the expression`myParamObj.Value`

.To use a numeric field of a structure, enter

`myStruct.PID.P1`

. If you store the structure in a`Simulink.Parameter`

object, enter`myStruct.Value.PID.P1`

.To use one cell of a cell array, enter

`myCells{3}`

.

You cannot use mathematical expressions such as *a* +
*b*. Sometimes, models have parameters that are not explicitly
defined in the model itself. For example, a gain `k`

could be
defined in the MATLAB workspace as `k = a + b`

, where `a`

and `b`

are not defined in the model but `k`

is
used. To add these independent parameters, see Add Model Parameters as Variables.