Check block orientation
Guideline: jc_0110: Direction of block
Checks blocks with changed orientation.
Identifies the blocks that are reversed or with rotated orientation. This check excludes Unit Delay and Delay blocks.
This check requires a Simulink® Check™ and Stateflow® license.
This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — No recommendations
JMAAB — a
Results and Recommended Actions
|Some blocks in the model have rotated or reversed orientation.
|Flip or rotate these blocks to be oriented toward the right.
Capabilities and Limitations
Runs on library models.
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to
Allows exclusions of blocks and charts.
This check is supported by edit-time checking.