Connect a Parrot Minidrone to a Windows System Using CSR 4.0 Bluetooth Dongle and CSR Bluetooth Drivers
The setup procedure for Parrot® in Windows® is divided into 4 parts:
Install Bluetooth Drivers: One-time setup for every PC.
Update the Firmware on Parrot Minidrone: One-time setup for every Parrot hardware (unless the original firmware is restored).
Connect to Parrot Mambo Minidrone over Bluetooth: Every time the minidrone is turned off and disconnected from the host PC and needs to be reconnected.
Set Up a Bluetooth NAP Connection and the IP on Your System: One-time setup for every PC.