Exhaust Manifold Thermal
Thermodynamics of combustion engine exhaust manifold
Simscape / Driveline / Engines & Motors / Engine Subcomponents
The Exhaust Manifold Thermal block represents the abstracted thermodynamics of a combustion engine exhaust manifold. The block integrates with the SI Combustion Cylinder block.
The block takes exhaust gas flow from the SI Combustion Cylinder blocks and computes the exhaust manifold temperature, Texh, which the block outputs at port Texh. The block calculates the output using a lumped-parameter model, such that
Cexh is the Heat capacity of exhaust wall parameter.
Mexh is the Mass of exhaust wall parameter.
hexh is the heat flow at the exhaust manifold.
hx is the heat exchange between the exhaust gas and the environment.
The block calculates hx as
Sexh is the Surface area of exhaust wall parameter.
hconvec is the Convective heat transfer coefficient for the outer side of exhaust parameter.
kra is the Radiation constant parameter.
σ is the Stefan-Boltzmann constant parameter.
Tamb is the Ambient temperature parameter.
The block finds hexh as
where kgas is the Time constant of exhaust heat flow parameter, and hin is the instantaneous heat flow from the engine exhaust outlets to the exhaust manifold. The instantaneous heat flow is the sum of the individual instantaneous heat flows at the exhaust outlets, hi, such that
where Nports is the Number of exhaust ports parameter.
Qeng — Gas energy flow, W
Physical signal input port associated with the gas energy flow, in W. Attach this port to the Weo physical signal output port on the SI Combustion Cylinder block.
Texh — Exhaust manifold temperature, K
Physical signal output port associated with the lumped-parameter exhaust manifold temperature, in K.
Number of exhaust ports — Number of exhaust ports
1 (default) | positive scalar
Number of SI Combustion Cylinder blocks.
Ambient temperature — Reference temperature
K (default) | positive scalar
Temperature of the air entering the intake.
Surface area of exhaust wall — Exhaust wall surface area
pi * ((1.5 / 2) ^ 2)
m^2 (default) | positive scalar
Surface area of the exhaust wall. This is only the surface area of the internal wall that makes contact with the exhaust.
Mass of exhaust wall — Exhaust wall total mass
kg (default) | positive scalar
Mass of the exhaust wall.
Heat capacity of exhaust wall — Exhaust wall heat capacity
J/(K*kg) (default) | positive scalar
Heat capacity of the exhaust wall.
Time constant of exhaust heat flow — Exhaust heat flow time constant
s (default) | positive scalar
Time constant for the rate of exhaust heat flow.
Convective heat transfer coefficient for the outer side of exhaust — Exhaust external convective heat transfer coefficient
W/(K*m^2) (default) | positive scalar
Convective heat transfer coefficient for the outer side of the exhaust.
Radiation constant — Exhaust radiation constant
0.3 (default) | positive scalar
Radiation constant of the exhaust.
Stefan-Boltzmann constant — Stefan-Boltzmann constant of exhaust
W/(K^4*m^2) (default) | positive scalar
Stefan-Boltzmann constant for the total exhaust.
Introduced in R2022a
Spark Ignition Engine | SI Combustion Cylinder | Crankshaft | Ignition Trigger | Air Intake