set
Description
Examples
Customize an ASAP2 File
Add, update, filter, find, and remove ECU descriptions in an ASAP2 file.
Open and Build Example Model
Open the example model ASAP2Demo
open_system("ASAP2Demo");
Build the model.
slbuild("ASAP2Demo");
### Searching for referenced models in model 'ASAP2Demo'. ### Found 1 model reference targets to update. ### Starting serial model reference code generation build. ### Successfully updated the model reference code generation target for: ASAP2DemoModelRef ### Starting build procedure for: ASAP2Demo ### Successful completion of build procedure for: ASAP2Demo Build Summary Model reference code generation targets: Model Build Reason Status Build Duration ============================================================================================================ ASAP2DemoModelRef Target (ASAP2DemoModelRef.c) did not exist. Code generated and compiled. 0h 0m 8.5574s Top model targets: Model Build Reason Status Build Duration ============================================================================================================ ASAP2Demo Information cache folder or artifacts were missing. Code generated and compiled. 0h 0m 14.207s 2 of 2 models built (0 models already up to date) Build duration: 0h 0m 24.52s
Create the ECU description object for the model.
descObj = coder.asap2.getEcuDescriptions("ASAP2Demo");
Get the list of available computation methods in the description object.
find(descObj,"CompuMethod")
ans = 1x10 string
"ASAP2DemoModelRef_CM_double" "ASAP2DemoModelRef_CM_int16_rpm" "ASAP2Demo_CM_double" "ASAP2Demo_CM_double_m_per__s_2_" "ASAP2Demo_CM_double_rpm" "ASAP2Demo_CM_int32" "ASAP2Demo_CM_single" "ASAP2Demo_CM_single_m_per__s_2_" "ASAP2Demo_CM_single_rpm" "ASAP2Demo_CM_uint8"
Filter the computation methods and get a list of computation methods that use rpm as the unit.
find(descObj,"CompuMethod",Units='rpm')
ans = 1x3 string
"ASAP2DemoModelRef_CM_int16_rpm" "ASAP2Demo_CM_double_rpm" "ASAP2Demo_CM_single_rpm"
Create and Add Custom Computation Method
To add a new computation method to the ASAP2 file, create a custom computation method.
CompuMethod_1 = coder.asap2.CompuMethod; CompuMethod_1.Name = 'CompuMethod_1'; CompuMethod_1.ConversionType = 'LINEAR'; CompuMethod_1.Coefficients = [2 3]; CompuMethod_1.LongIdentifier = 'longIdentifierTest'; CompuMethod_1.Format = '%2.3'; CompuMethod_1.Units = 's';
Add the custom computation method to the ECU description object.
add(descObj,CompuMethod_1);
Get the properties of the newly added computation method.
get(descObj,"CompuMethod","CompuMethod_1")
ans = CompuMethod with properties: Name: 'CompuMethod_1' LongIdentifier: 'longIdentifierTest' Format: '%2.3' Units: 's' Coefficients: [2 3] ConversionType: 'LINEAR' CompuVTabValues: [1x1 struct] CustomData: ""
To modify a property of the computation method, use set function. Update the ConversionType field of the computation method to TAB_VERB and define the CompuVTabValues.
set(descObj,"CompuMethod","CompuMethod_1",ConversionType="TAB_VERB"); set(descObj,"CompuMethod","CompuMethod_1",CompuVTabValues = struct('Literals',["false" "true"],'Values',[0 1]));
Get the properties to see the modified fields.
modifiedprop = get(descObj,"CompuMethod","CompuMethod_1")
modifiedprop = CompuMethod with properties: Name: 'CompuMethod_1' LongIdentifier: 'longIdentifierTest' Format: '%2.3' Units: 's' Coefficients: [2 3] ConversionType: "TAB_VERB" CompuVTabValues: [1x1 struct] CustomData: ""
modifiedprop.CompuVTabValues
ans = struct with fields:
Literals: ["false" "true"]
Values: [0 1]
Generate the ASAP2 file using the updated ECU description object and verify that the ASAP2 file contains the computation method CompuMethod_1.
coder.asap2.export("ASAP2Demo",CustomEcuDescriptions=descObj);
Following Characteristics or Measurements with unsupported data types are not exported in ASAP2 file. "ASAP2Demo_DW.ASAP2DemoModelRef_InstanceData"
Delete Computation Method
Remove the newly added computation method from the description object.
delete(descObj,"CompuMethod","CompuMethod_1");
Create and Add Custom Characteristic
To add a new characteristic to the ASAP2 file, create a custom characteristic.
Parameter_1 = coder.asap2.Characteristic; Parameter_1.Name = 'Custom_parameter1'; Parameter_1.LongIdentifier = 'longIdentifierParam'; Parameter_1.UpperLimit = 255; Parameter_1.LowerLimit = 0;
Add the custom characteristic to the ECU description object.
add(descObj,Parameter_1);
Get the properties of the newly added characteristic.
get(descObj,"Characteristic","Custom_parameter1")
ans = Characteristic with properties: Name: 'Custom_parameter1' LongIdentifier: 'longIdentifierParam' Type: 'VALUE' EcuAddress: '0x0000' CompuMethodName: 'NO_COMPU_METHOD' LowerLimit: 0 UpperLimit: 255 EcuAddressComment: "" EcuAddressExtension: [] CalibrationAccess: 'Calibration' DisplayIdentifier: "" Format: "" BitMask: [] AxisInfo: [] RecordLayout: "" Dimensions: [] Export: 1 MaxRefresh: [1x1 struct] SymbolLink: [1x1 struct] CustomData: ""
To modify a property of the characteristic, use set function. Update the UpperLimit field of the characteristic.
set(descObj,"Characteristic","Custom_parameter1",UpperLimit=128)
Generate the ASAP2 file using the updated ECU description object and verify that the ASAP2 file contains the characteristic Custom_parameter1.
coder.asap2.export("ASAP2Demo",CustomEcuDescriptions=descObj);
Following Characteristics or Measurements with unsupported data types are not exported in ASAP2 file. "ASAP2Demo_DW.ASAP2DemoModelRef_InstanceData"
Remove the newly added characteristic from the description object.
delete(descObj,"Characteristic","Custom_parameter1");
Create and Add Custom Measurement
To add a new measurement to the ASAP2 file, create a custom measurement.
Signal_1 = coder.asap2.Measurement; Signal_1.Name = 'Custom_signal1'; Signal_1.LongIdentifier = 'longIdentifierSignal'; Signal_1.UpperLimit = 255; Signal_1.LowerLimit = 0;
Add the custom measurement to the ECU description object.
add(descObj,Signal_1);
Get the properties of the newly added measurement.
get(descObj,"Measurement","Custom_signal1")
ans = Measurement with properties: Name: 'Custom_signal1' LongIdentifier: 'longIdentifierSignal' DataType: 'UBYTE' EcuAddress: '0x0000' CompuMethodName: "" LowerLimit: 0 UpperLimit: 255 Raster: [1x1 struct] EcuAddressComment: "" EcuAddressExtension: [] CalibrationAccess: 'NoCalibration' DisplayIdentifier: "" Format: "" BitMask: [] Dimensions: [] Export: 1 MaskData: [1x1 struct] MaxRefresh: [1x1 struct] SymbolLink: [1x1 struct] CustomData: ""
To modify a property of the measurement, use set function. Update the CalibrationAccess field of the measurement.
set(descObj,"Measurement","Custom_signal1",CalibrationAccess='Calibration')
Generate the ASAP2 file using the updated ECU description object and verify that the ASAP2 file contains the measurement with name Custom_signal1.
coder.asap2.export("ASAP2Demo",CustomEcuDescriptions=descObj);
Following Characteristics or Measurements with unsupported data types are not exported in ASAP2 file. "ASAP2Demo_DW.ASAP2DemoModelRef_InstanceData"
Remove the newly added measurement from the description object.
delete(descObj,"Measurement","Custom_signal1");
Create and Add Lookup Table Parameter
Add a lookup table parameter.
LUT_Parameter = coder.asap2.Characteristic; LUT_Parameter.Name = "custom_lookup_table"; LUT_Parameter.Type = "MAP";
Create and add axis information to the parameter.
axis_data = coder.asap2.AxisInfo; axis_data(1).Name = 'BP3'; axis_data(2).Name = 'Bp4'; axis_data(1).CompuMethodName = 'ASAP2Demo_CM_double'; axis_data(2).CompuMethodName = 'ASAP2Demo_CM_double'; axis_data(1).MaxAxisPoints = '3'; axis_data(2).MaxAxisPoints = '3'; axis_data(1).AxisType = 'STD_AXIS'; axis_data(2).AxisType = 'STD_AXIS'; LUT_Parameter.AxisInfo = axis_data;
Add the lookup table parameter to the description object.
add(descObj,LUT_Parameter)
Generate the ASAP2 file using the updated ECU description object and verify that the ASAP2 file contains the lookup table parameter custom_lookup_table.
coder.asap2.export("ASAP2Demo",CustomEcuDescriptions=descObj);
Following Characteristics or Measurements with unsupported data types are not exported in ASAP2 file. "ASAP2Demo_DW.ASAP2DemoModelRef_InstanceData"
Input Arguments
descObj
— ECU description object
getEcuDescriptions
object
Information object created by using the coder.asap2.getEcuDescriptions
function containing the
ASAP2 properties of a given model.
Example: descObj =
coder.asap2.getEcuDescriptions(<modelName>)
category
— Category in ECU descriptions
AxisPoint
| Characteristic
| CompuMethod
| Function
| Measurement
Specify the category available in the information object to set the ASAP2 element.
Example: Characteristic
name
— Name from the category
char vector
| string scalar
Specify the name available in the specified category to set value to a property of the ASAP2 element.
Example: CompuMethod1
Example: Parameter_p1
Property
— Name of the property
char vector | string scalar
Specify a value for the property in the available names from the specified category of the ASAP2 elements.
Example: descObj.set
("CompuMethod
","CompuMethod_CM1",
Units='custom_units'
)
Example: descObj.set
("Characteristic
","Parameter_P1",
DisplayIdentifier='ParamGain'
)
Version History
Introduced in R2022b
See Also
add
| get
| find
| delete
| coder.asap2.getEcuDescriptions
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)