# ctmeasjac

## Syntax

## Description

returns the measurement Jacobian, `measurementjac`

= ctmeasjac(`state`

)`measurementjac`

, for a
constant turn-rate Kalman filter motion model in rectangular coordinates.
`state`

specifies the current state of the track.

also specifies the measurement coordinate system, `measurementjac`

= ctmeasjac(`state`

,`frame`

)`frame`

.

also specifies the sensor position, `measurementjac`

= ctmeasjac(`state`

,`frame`

,`sensorpos`

)`sensorpos`

.

also
specifies the sensor velocity, `measurementjac`

= ctmeasjac(`state`

,`frame`

,`sensorpos`

,`sensorvel`

)`sensorvel`

.

specifies the measurement parameters,
`measurementjac`

= ctmeasjac(`state`

,`measurementParameters`

)`measurementParameters`

.

## Examples

### Measurement Jacobian of Constant Turn-Rate Motion in Rectangular Frame

Define the state of an object in 2-D constant turn-rate motion. The state is the position and velocity in each dimension, and the turn rate. Construct the measurement Jacobian in rectangular coordinates.

state = [1;10;2;20;5]; jacobian = ctmeasjac(state)

`jacobian = `*3×5*
1 0 0 0 0
0 0 1 0 0
0 0 0 0 0

### Measurement Jacobian of Constant Turn-Rate Motion in Spherical Frame

Define the state of an object in 2-D constant turn-rate motion. The state is the position and velocity in each dimension, and the turn rate. Compute the measurement Jacobian with respect to spherical coordinates.

```
state = [1;10;2;20;5];
measurementjac = ctmeasjac(state,'spherical')
```

`measurementjac = `*4×5*
-22.9183 0 11.4592 0 0
0 0 0 0 0
0.4472 0 0.8944 0 0
0.0000 0.4472 0.0000 0.8944 0

### Measurement Jacobian of Constant Turn-Rate Object in Translated Spherical Frame

Define the state of an object in 2-D constant turn-rate motion. The state is the position and velocity in each dimension, and the turn rate. Compute the measurement Jacobian with respect to spherical coordinates centered at `[5;-20;0]`

.

```
state = [1;10;2;20;5];
sensorpos = [5;-20;0];
measurementjac = ctmeasjac(state,'spherical',sensorpos)
```

`measurementjac = `*4×5*
-2.5210 0 -0.4584 0 0
0 0 0 0 0
-0.1789 0 0.9839 0 0
0.5903 -0.1789 0.1073 0.9839 0

### Measurement Jacobian of Constant Turn-Rate Object Using Measurement Parameters

Define the state of an object in 2-D constant turn-rate motion. The state is the position and velocity in each dimension, and the turn rate. Compute the measurement Jacobian with respect to spherical coordinates centered at `[25;-40;0]`

.

```
state2d = [1;10;2;20;5];
sensorpos = [25,-40,0].';
frame = 'spherical';
sensorvel = [0;5;0];
laxes = eye(3);
measurementjac = ctmeasjac(state2d,frame,sensorpos,sensorvel,laxes)
```

`measurementjac = `*4×5*
-1.0284 0 -0.5876 0 0
0 0 0 0 0
-0.4961 0 0.8682 0 0
0.2894 -0.4961 0.1654 0.8682 0

Put the measurement parameters in a structure and use the alternative syntax.

measparm = struct('Frame',frame,'OriginPosition',sensorpos,'OriginVelocity',sensorvel, ... 'Orientation',laxes); measurementjac = ctmeasjac(state2d,measparm)

`measurementjac = `*4×5*
-1.0284 0 -0.5876 0 0
0 0 0 0 0
-0.4961 0 0.8682 0 0
0.2894 -0.4961 0.1654 0.8682 0

## Input Arguments

`state`

— State vector

real-valued 5-element vector | real-valued 7-element vector | 5-by-*N* real-valued matrix | 7-by-*N* real-valued matrix

State vector for a constant turn-rate motion model in two or three spatial dimensions, specified as a real-valued vector or matrix.

When specified as a 5-element vector, the state vector describes 2-D motion in the

*x-y*plane. You can specify the state vector as a row or column vector. The components of the state vector are`[x;vx;y;vy;omega]`

where`x`

represents the*x*-coordinate and`vx`

represents the velocity in the*x*-direction.`y`

represents the*y*-coordinate and`vy`

represents the velocity in the*y*-direction.`omega`

represents the turn rate.When specified as a 5-by-

*N*matrix, each column represents a different state vector*N*represents the number of states.When specified as a 7-element vector, the state vector describes 3-D motion. You can specify the state vector as a row or column vector. The components of the state vector are

`[x;vx;y;vy;omega;z;vz]`

where`x`

represents the*x*-coordinate and`vx`

represents the velocity in the*x*-direction.`y`

represents the*y*-coordinate and`vy`

represents the velocity in the*y*-direction.`omega`

represents the turn rate.`z`

represents the*z*-coordinate and`vz`

represents the velocity in the*z*-direction.When specified as a 7-by-

*N*matrix, each column represents a different state vector.*N*represents the number of states.

Position coordinates are in meters. Velocity coordinates are in meters/second. Turn rate is in degrees/second.

**Example: **`[5;0.1;4;-0.2;0.01]`

**Data Types: **`double`

`frame`

— Measurement output frame

`'rectangular'`

(default) | `'spherical'`

Measurement output frame, specified as `'rectangular'`

or
`'spherical'`

. When the frame is `'rectangular'`

,
a measurement consists of *x*, *y*, and
*z* Cartesian coordinates. When specified as
`'spherical'`

, a measurement consists of azimuth, elevation,
range, and range rate.

**Data Types: **`char`

`sensorpos`

— Sensor position

`[0;0;0]`

(default) | real-valued 3-by-1 column vector

Sensor position with respect to the navigation frame, specified as a real-valued 3-by-1 column vector. Units are in meters.

**Data Types: **`double`

`sensorvel`

— Sensor velocity

`[0;0;0]`

(default) | real-valued 3-by-1 column vector

Sensor velocity with respect to the navigation frame, specified as a real-valued 3-by-1 column vector. Units are in m/s.

**Data Types: **`double`

`laxes`

— Local sensor coordinate axes

`[1,0,0;0,1,0;0,0,1]`

(default) | 3-by-3 orthogonal matrix

Local sensor coordinate axes, specified as a 3-by-3 orthogonal matrix. Each column specifies
the direction of the local *x*-, *y*-, and
*z*-axes, respectively, with respect to the navigation frame. That
is, the matrix is the rotation matrix from the global frame to the sensor frame.

**Data Types: **`double`

`measurementParameters`

— Measurement parameters

structure | array of structure

Measurement parameters, specified as a structure or an array of structures. The fields of the structure are:

Field | Description | Example |
---|---|---|

`Frame` | Frame used to report measurements, specified as one of these values: `'Rectangular'` — Detections are reported in rectangular coordinates.`'Spherical'` — Detections are reported in spherical coordinates.
In Simulink, when you create an object detection Bus, specify
| `'spherical'` |

`OriginPosition` | Position offset of the origin of the frame relative to the parent frame, specified as an `[x y z]` real-valued vector. | `[0 0 0]` |

`OriginVelocity` | Velocity offset of the origin of the frame relative to the parent frame, specified as a `[vx vy vz]` real-valued vector. | `[0 0 0]` |

`Orientation` | Frame rotation matrix, specified as a 3-by-3 real-valued orthonormal matrix. | `[1 0 0; 0 1 0; 0 0 1]` |

`HasAzimuth` | Logical scalar indicating if azimuth is included in the measurement. This
field is not relevant when the | `1` |

`HasElevation` | Logical scalar indicating if elevation information is included in the measurement. For
measurements reported in a rectangular frame, and if
`HasElevation` is false, the reported measurements assume 0
degrees of elevation. | `1` |

`HasRange` | Logical scalar indicating if range is included in the measurement. This
field is not relevant when the | `1` |

`HasVelocity` | Logical scalar indicating if the reported detections include velocity measurements. For a
measurement reported in the rectangular frame, if `HasVelocity`
is `false` , the measurements are reported as ```
[x y
z]
``` . If `HasVelocity` is `true` ,
the measurement is reported as `[x y z vx vy vz]` . For a
measurement reported in the spherical frame, if `HasVelocity`
is `true` , the measurement contains range-rate
information. | `1` |

`IsParentToChild` | Logical scalar indicating if `Orientation` performs a frame rotation from the parent coordinate frame to the child coordinate frame. When `IsParentToChild` is `false` , then `Orientation` performs a frame rotation from the child coordinate frame to the parent coordinate frame. | `0` |

If you only want to perform one coordinate transformation, such as a transformation from the body frame to the sensor frame, you only need to specify a measurement parameter structure. If you want to perform multiple coordinate transformations, you need to specify an array of measurement parameter structures. To learn how to perform multiple transformations, see the Convert Detections to objectDetection Format (Sensor Fusion and Tracking Toolbox) example.

**Data Types: **`struct`

## Output Arguments

`measurementjac`

— Measurement Jacobian

real-valued 3-by-5 matrix | real-valued 4-by-5 matrix

Measurement Jacobian, returned as a real-valued 3-by-5 or 4-by-5
matrix. The row dimension and interpretation depend on value of the `frame`

argument.

Frame | Measurement Jacobian |
---|---|

`'rectangular'` | Jacobian of the measurements `[x;y;z]` with
respect to the state vector. The measurement vector is with respect
to the local coordinate system. Coordinates are in meters. |

`'spherical'` | Jacobian of the measurement vector `[az;el;r;rr]` with
respect to the state vector. Measurement vector components specify
the azimuth angle, elevation angle, range, and range rate of the object
with respect to the local sensor coordinate system. Angle units are
in degrees. Range units are in meters and range rate units are in
meters/second. |

## More About

### Azimuth and Elevation Angle Definitions

Define the azimuth and elevation angles used in the toolbox.

The *azimuth angle* of a vector is the
angle between the *x*-axis and its orthogonal projection
onto the *xy* plane. The angle is positive in going
from the *x* axis toward the *y* axis.
Azimuth angles lie between –180 and 180 degrees. The *elevation
angle* is the angle between the vector and its orthogonal
projection onto the *xy*-plane. The angle is positive
when going toward the positive *z*-axis from the *xy* plane.

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

## Version History

**Introduced in R2021a**

## See Also

### Functions

`constacc`

|`constaccjac`

|`cameas`

|`cameasjac`

|`constturn`

|`constturnjac`

|`ctmeas`

|`constvel`

|`constveljac`

|`cvmeas`

|`cvmeasjac`

### Objects

## Open Example

You have a modified version of this example. Do you want to open this example with your edits?

## MATLAB Command

You clicked a link that corresponds to this MATLAB command:

Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)