MathWorks Consulting Services is a unique combination of real-world industry experience and MATLAB and Simulink expertise. MathWorks Consultants possess industry backgrounds in aerospace, automotive, communications, financial services, energy production, biotech, industrial automation, and supply chain logistics. Our Consultants tap into lessons learned from thousands of customer engagements and put it to work on your project.
MathWorks Consulting differs from others in our focus on knowledge transfer. We arm you with the ability to use, develop, and enhance your analysis code, applications, or models based on MATLAB and Simulink. After an engagement with MathWorks Consultants, you become more productive and creative, gaining the greatest possible benefit from MATLAB and Simulink.
Another key differentiator is our ability to leverage the experience and knowledge not only of worldwide MathWorks Consulting Services but also of our MATLAB and Simulink product developers and other technical experts within the company to bring insider knowledge on the latest MathWorks technologies.
"The MathWorks Consultants have complete mastery over MATLAB and Simulink products, which enabled us to develop and optimize the simulator interface using best practices that improved productivity and maintainability. Because knowledge transfer was a priority throughout the project, we are now autonomous, and continuing development on our own."Jérôme Vouillat, Simulation Engineer, DCNS
Ajit Shenoy is a principal technical consultant with over 20 years’ industry experience utilizing Model-Based Design for the development of safety-critical embedded software in the aerospace and automotive domains. He has also worked extensively on real-time simulation for hardware-in-the-loop (HIL) systems. Ajit received his Ph.D. in Aerospace Engineering from Virginia Tech, specializing in optimal control and design optimization. Prior to joining MathWorks, Ajit worked at Honeywell Aerospace on DO-178 certification and at Applied Dynamics and General Motors on HIL real-time simulation and modeling.
AFOSR Workshop on Optimal Design and Control: Adjoint-Based Methods in Aerodynamic Design-Optimization (Conference paper; log-in required)
SAE 2005: Automate HIL Calibration to Reduce Integration Cost and Improve Repeatability (Aerotech Congress & Exhibition presentation)
AFOSR Workshop on Optimal Design and Control: An All-At-Once Approach to Airfoil Design
AIAA: On the Optimality System for a 1-D Euler Flow Problem(Conference paper)
AIAA: Thermal-Fluid Control via Finite-Dimensional Approximation (Conference paper)
Journal of Optimization Theory and Applications: An Optimal Control Problem for Flows with Discontinuities
IEEE: Computational Issues in Optimization-Based Design (Conference paper; log-in required)
Akira Agata, a principal technical consultant in our Tokyo office, focuses on helping customers with signal processing, communications, and data analysis applications. For over 16 years he worked as a researcher at the telecommunications company, KDDI, designing high-speed optical communications systems, developing digital signal processing techniques to enhance the optical and wireless signal quality, and optimizing traffic on a telecom network. Akira earned a B.Eng. in Electronic and Information Engineering, and an M.Eng. and Ph.D. in Electrical, Information, and Energy Engineering from Osaka University. He holds over 40 patents related to optical communication systems, digital signal processing, and telecom network planning algorithms. He is a member of the Communication Society of the Institute of Electronics, Information and Communication Engineers (IEICE), and the European Telecommunication Standards Institute (ETSI).
Related Conference Papers and Technical Materials
IEEE 2014: Performance enhancement of optical access network in C-RAN using nonlinear quantization-based compression (Conference paper; login required)
IEEE 2011: Suboptimal ODN Design Algorithm for Minimizing Cable Deployment Cost (Conference paper; login required)
IEEE 2010: RSOA-based 10G WDM PON using FEC and MLSE equalizers (Conference paper; login required)
Study on the optimum Reed-Solomon-based FEC codes for 40-Gb/s-based ultralong-distance WDM transmission (IEEE journal article; login required)
Pattern-dependent bit error characteristics induced by asymmetrically filtering of CS-RZ signal (IEEE journal article; login required)
Enhancement of Modulation Speed of RSOA by Using Instantaneous Injection/Depletion Current (IEICE technical article; login required)
Amy Koh is a consultant engineer who specializes in modeling, simulation, and automatic code generation for embedded hardware. She assists customers from the automotive, aerospace, and defense industries in adopting Model-Based Design workflows. Amy received her Ph.D. in control engineering from the University of Cambridge, U.K., and B.Eng. in electrical and electronic engineering from the University of Melbourne, Australia.
Anders Sollander, a principal technical consultant, assists customers with many aspects of Model-Based Design including automatic code generation, interfacing software and hardware, implementing protocols and compilers, and optimizing design and architecture. He helps companies assess, analyze, and optimize their Model-Based Design workflows. Anders received his M.S. degree in technical physics from Uppsala University, Sweden.
Anita Gajjala is a senior technical consultant who specializes in designing and implementing software solutions for customers seeking a customized and streamlined workflow in MATLAB. She helps organizations connect MATLAB with their databases, automate manual tasks, and analyze data via application-specific user interfaces. She has worked with companies in the biotech, pharmaceutical, energy, automotive, aerospace, and defense industries. Anita received her B.S. and M.S. degrees in electrical and computer engineering from Cornell University and Georgia Institute of Technology. She is currently serving as the Society of Women Engineers (SWE) Boston Section President for 2016 to 2017.
Antje Dittmer, a senior technical consultant, has a background in control engineering and optimization. She worked on testing, simulation, and optimization of online display advertisement algorithms in the research departments of Yahoo! and AOL. Prior to that, she worked on helicopter control designs as a research engineer at the German Aerospace Center (DLR). Antje holds a M. Sc. in Electrical Engineering from Technische Universität Hamburg-Harburg (TUHH).
Related Conference Papers and Technical Materials
CEAS Aeronautical Journal: Evaluation of flying helicopter simulator noseboom correction coefficients (Journal article; log-in required)
CEAS Aeronautical Journal: Model-based control of the flying helicopter simulator: evaluating and optimizing the feedback controller (Journal article; log-in required)
American Helicopter Society: Optimization of the Cascade-Feedback Parameters of the Flying Helicopter (FHS) Model Based Controller (Abstract)
Deutscher Luft- und Raumfahrtkongress 2010: Dynamic Calibration Of The Noseboom Sensors Of The Flying Helicopter Simulator (Abstract)
Arvind Hosagrahara is a principal technical consultant who specializes in helping finance, energy trading and production, automotive, and aerospace organizations use MATLAB algorithms in their business-critical applications. Arvind has extensive hands-on experience developing MATLAB and Simulink applications and integrating them with external technologies such as Java, .NET, RDBMS, and others. He has helped design the software and workflow for a variety of business critical applications focusing on robustness, security, scalability, maintainability, usability, and forward compatibility. He holds a B.S.M.E. from Bangalore University, India, and an M.S. from the University of Illinois at Urbana Champaign.
Open and Extensible (Blog post)
Making Code Usable, Useful and Testable (Blog post)
MATLAB in Business-Critical Applications (Blog post)
From Big Engineering Data to Insights Using MATLAB Analytics (15:27) (Video)
Build a Product, Build a Service (Blog post)
Aurélie Urbain is a consultant engineer focusing on machine learning, data analytics, parallel computing, and application deployment. She earned a bachelor’s degree in biotechnology and bio industry at the University of Evry, a master’s degree in genome analysis and molecular modeling from Paris Descartes University, and a Ph.D. in applied mathematics in system biology from the National Institute for Agricultural Research (INRA), France. After her thesis, she completed three years of post-doctorate work in image and signal processing and application development at INRA.
Branko Dijkstra is a principal technical consultant specializing in Model-Based Design workflows for process industry optimization. Prior to joining MathWorks, Branko was an engineering manager for the development of automotive climate control and electric vehicle thermal management systems. Before that, he worked in the microlithography industry. Branko received his M.E. based on his work modeling a batch crystallization plant. He received his Ph.D. in control engineering (microlithography) from Delft University of Technology, the Netherlands based on his thesis Iterative Learning Control Applied to a Wafer Stage.
Chris Hayhurst leads the MathWorks Consulting Services organization in Europe, managing a group of highly experienced engineers who cover many industries and every aspect of MATLAB and Simulink product capability. Chris works with automotive, aerospace, electrical machine, and industrial equipment companies to assess and optimize their development processes and adoption of Model-Based Design. Before coming to MathWorks, Chris was involved in the design of flight control systems for helicopters, working with Simulink to model future helicopter dynamics and control strategies. He holds a degree in electrical engineering from Cambridge University and is also active in the Institute of Engineering and Technology and in encouraging engineering and computing education in schools.
Reacting to Events in Your Data Using MATLAB (Blog post)
Students who don’t pick Stem are “cutting themselves off” (Journal article)
Tools for technology education (Journal article)
Children Program LEGO Mindstorms NXT Robots (3:03) (Video)
Christophe Pouillot is a senior technical consultant who specializes in automatic code generation and model verification and validation. In addition, his work includes developing, deploying, and interfacing MATLAB and Simulink applications with programming languages such as C/C++, .NET, and Java. His current focus is on helping customers adopt Model-Based Design processes and tools for industry standards. Prior to joining MathWorks, Christophe designed and developed software applications in the energy production, automotive, and aero defense industries. Christophe received his B.S. and M.S. in robotic engineering from L’École Centrale de Nantes, France.
David Hoadley, Ph.D., is a principal technical consultant in our Michigan office. He specializes in supporting customers who elect to adopt Model-Based Design in their product development workflow. This focus regularly includes production code generation and verification and validation of designs for medical device, automotive, aerospace, and defense applications. Before joining MathWorks, Dave was a project scientist at VI Engineering where he developed test, measurement, and process control applications for these same industries. Dave holds a B.S. in mathematics and astrophysics, and a Ph.D. in condensed matter physics from Michigan State University.
David Jaffry is a consultant engineer in MathWorks Consulting Services. He helps automotive, aerospace, biotech and industrial automation companies with Model-Based Design implementation, verification and validation techniques, and embedded system development. Before coming to MathWorks, his work encompassed software development and code verification for embedded systems at Silicomp and Polyspace Technologies. David holds a master degree in computer systems engineering from the École Nationale d’Ingénieurs de Brest.
David Sampson is a principal consultant and manager of the UK group in MathWorks Consulting Services. He specializes in Simulink based simulation and control for automotive and aerospace applications, and MATLAB based software development across a range of industries. A mechanical engineer by training, David holds a Ph.D. from the University of Cambridge, U.K., and a B.Eng. from the University of Sydney, Australia.
Elmar Tarajan is a senior consultant who helps customers develop interactive user interfaces and data visualizations, and optimize MATLAB code. His work focuses on software architectural design and solutions implementation. Before joining MathWorks, Elmar worked on applying image recognition techniques for traffic sign recognition at Daimler Research & Development in Ulm (Germany). Elmar received his M.S. degree in computer science engineering from the Technical University in Ilmenau, Germany.
Florin Nae is a senior technical consultant with more than 20 years’ experience in the automotive and aerospace industries. Florin works with companies to implement an approach using Model-Based Design for control algorithm design, plant modeling, automatic code generation, and verification and validation techniques to meet ISO standards. He holds an M.Eng in. in aerospace engineering from Polytechnic University, Bucharest and a D.Eng. in aerospace engineering, Nagoya University.
François Guérin is a principal technical consultant with over 10 years’ experience assisting companies in the implementation and optimization of Model-Based Design. He specializes in providing guidance for the development of high integrity systems in aerospace, rail, and space that comply with software safety standards such as DO-178, ISO 26262, EN 50128, and IEC 61508. Prior to joining MathWorks, François was a member of the Control Distributed and Automation group of the University of Cambridge, and a software engineer at Alten France where he developed and tested embedded controllers for chassis and safety applications for the automotive industry. He received a B.Eng. in European Engineering and an M.S in Control Engineering from Coventry University.
Giacomo Perantoni assists customers in the automotive industry on simulation, Model-Based Design optimization, and control of nonlinear dynamic systems. His doctoral studies involved tire friction modeling and minimum-time maneuvering of two- and four-wheeled vehicles. Giacomo received his D.Phil. in control engineering from the University of Oxford.
Hongxiang Hu is a senior consultant engineer with an automotive background in engine electrical control system design and calibration. Previously he worked at Chongqing Changan Suzuki Automobile on emissions testing and at Visteon as a calibration group leader. At MathWorks he helps customers calibrate engine electrical control systems to meet emissions, fuel economy, and performance requirements. He also supports customers in vehicle level simulation and optimization. Hongxiang Hu received his bachelor’s in automotive engineering and computer science and technology, and his master’s in automotive engineering from Chongqing University and holds seven patents
Jack Kwon is a principal consulting engineer in our Korea office. He helps customers adopt Model-Based Design methodologies and tools for embedded control system development. With over 15 years’ industry experience in automotive and industrial automation, Jack worked at Litens Automotive Group, SIEMENS VDO Automotive before joining MathWorks. Jack earned his BSc in mechanical engineering from Hanyang University, Korea and his MSc in mechanical engineering from Yonsei University, Korea.
Real-time Testing (39:05) (Korean language video)
Optimizing Mechatronic Systems (49:24) (Korean language video)
James C. Cross III leads the Consulting Services team at MathWorks headquarters. He has extensive experience working in professional services and leading technology and product development in the energy and chemicals sectors. James specializes in model conceptualization, process simulation and optimization, and program management. He holds 3 related patents and has 11 patents pending. James earned an S.B. in chemical engineering from M.I.T., an M.S.E. in chemical engineering from Princeton University, and an M.S. in scientific computing from Stanford University. He is a member of the American Institute of Chemical Engineers (AIChE), the American Statistical Association (ASA), the Institute for Electrical and Electronics Engineers (IEEE), and the Society for Industrial and Applied Mathematics (SIAM).
AIChE 2016: Stochastic Modeling Using Virtual Training Sets (Technical article)
Electrochemical Fuels for Energy Storage Applications (Conference paper)
Effect of Gas Diffusion Layer Modulus And Land-Groove Geometry On Membrane Stresses In Proton Exchange Membrane Fuel Cells (Journal article; log-in required)
PEM Technology for the Chlor-Alkali Industry (Conference presentation)
Design, Development, and Evaluation of Hydrocarbon-Based Fuels for Fuel Cell On-Board Reformers (Technical paper; log-in required)
Jason Moore, a senior consultant engineer, helps customers in the automotive, aerospace, medical device, and communications industries adopt Model-Based Design. His areas of focus include design verification and validation, building embedded HMI applications, working with the AUTOSAR standard, and code generation. Before coming to MathWorks, Jason worked at Denso, TRW, and Yazaki developing automotive software applications ranging from antilock brake controllers to instrument clusters. Jason holds a B.S. and M.S. in Electrical Engineering from the University of Michigan-Dearborn.
Designing Displays using Model-Based Design (44:25) (Webinar)
MathWorks Automotive Conference 2015: Building Embedded Displays Using Model-Based Design (Presentation, PDF)
Joel Berg is a principal technical consultant with over 20 years’ industry experience in advanced process control design and physical modeling with 12 related patents pending. He specializes in parameter identification and controls design for clients in a wide range of industries including aerospace, automotive, energy, life sciences, and industrial automation. Joel holds a B.S. and M.S. in engineering science from the University of Wisconsin-Madison and a Ph.D. in engineering science and mechanics from Virginia Polytechnic Institute and State University.
John Baek is a senior consulting engineer in our Korea office. He helps customers adopt Model-Based Design methodologies and tools for embedded control system development. Before joining MathWorks, John worked at Mando an automotive chassis systems supplier for over 13 years, developing chassis control algorithms, designing and verifying embedded software, and testing system integration in simulation. John earned his B.Sc. in Mechanical Engineering and his M.Sc. in Automotive Engineering from Hanyang University, Korea.
John Boyd is a senior technical consultant. John works with customers across a range of industries including aerospace, automotive, biotech, energy, and finance, applying MATLAB solutions to a variety of challenges. He has extensive experience building real-time hardware-in-the-loop computer systems. For over 20 years he has specialized in software used to design, validate, and verify control system software. John holds a B.S. in computer science from Michigan State University, an M.S. from Purdue University, and an M.B.A. from the University of Michigan.
John Lee is a senior consultant engineer who works with customers in the automotive and commercial vehicles industry to address embedded controls development challenges and implement Model-Based Design. John’s current technical focus is on model verification and validation techniques and ISO 26262. With over 15 years of industry experience, John has worked for Caterpillar and Delphi in a variety of applications ranging from diesel cold start control, semi-active suspension systems, and automotive interior modules. John received his B.S. and M.S. in mechanical engineering from the Ohio State University.
Jonathan Young, a principal technical consultant with over 25 years of FPGA/ASIC experience, helps customers develop systems and algorithms, generate HDL code, and implement and verify their designs onto target hardware. He also works with customers to accelerate the design of signal processing applications, such as 5G/4G/LTE, Wi-Fi, SDR, radar, and design of Xilinx and Altera Microsemi FPGAs and SoCs. Jonathan holds nine patents, and received his B.S. and M.S. degrees in electrical engineering from Massachusetts Institute of Technology and Northeastern University.
Jorge Paloschi has over 15 years of industry experience in chemical engineering working on simulation of large chemical processes, and in finance where he worked at one of the biggest investment banks in London on simulation of large portfolios. Jorge is a senior consultant specializing in solving complex optimization problems, integrating MATLAB code within production environments, and many other applied mathematics based applications for the finance industry. In addition to his industrial experience, Jorge spent 15 years in academia where he published a number of scientific papers on applied mathematics. He received a Ph.D. in chemical engineering from Imperial College (London) and a B.Sc. in mathematics from Universidad del Sur in Argentina.
Joyeeta Mitra Mukherjee is a consultant engineer who helps customers develop MATLAB-based algorithms for computer vision and image processing applications. She holds a Ph.D. from the University of Houston, Texas in electrical and computer engineering with a focus on signal processing and neural networks. Before joining MathWorks, Joyeeta was an assistant professor of radiology at University of Massachusetts Medical School where she developed algorithms for image reconstruction, image registration, and motion correction in nuclear imaging modalities (PET and SPECT). She also consulted for a start-up that developed medical devices for image-guided interventional electrophysiology (EP); she worked on 3D visualization, cardiac chamber mapping, automated segmentation, and object tracking. Joyeeta is a member of SPIE and a senior member of IEEE.
Kevin J. Rzemien is a principal technical consultant with over 25 years’ experience using Model-Based Design to develop embedded control systems for use in the automotive, aerospace, and off-highway vehicles industries. His work includes control system, plant modeling, and HIL development. Kevin received a B.S. in electrical engineering from Lawrence Technological University and an M.S. in electronics and computer controlled systems from Wayne State University. He holds two patents and is a member of the Society of Automotive Engineers (SAE) and the Institute of Electrical and Electronic Engineers (IEEE).
Lars Rosqvist is a senior consultant who helps customers in the automotive, railway, mining, and industrial automation industries adopt Model-Based Design methodologies from initial steps to full deployment. Before joining MathWorks, Lars developed climate control systems in the automotive industry. Lars received his M.S. in applied physics and electrical engineering from Linköping University of Technology.
Mariano Maté, a senior consultant, helps customers model, implement, and verify their FPGA, ASIC, and System-on-Chip designs. He teaches customers best practices for optimizing and automating their functional verification workflow to speed development time and reduce design errors. He also works with customers to establish Model-Based Design for FPGA and ASIC development. Mariano earned his B.Sc. and M.Sc. in telecommunications engineering from Universidad Politécnica de Madrid; while studying at Technische Universität München he wrote his Master’s thesis on code generation at Infineon AG. He worked for many years at Airbus Defence and Space doing FPGA/ASIC development and verification for satellite systems.
Michael Burke is a principal technical consultant with 19 years’ industry experience focusing on the analysis of workflows using Model-Based Design, and hardware-in-the-loop (HIL) systems, and testing strategies. For the last 8 years Michael has led the MathWorks Automotive Advisory Board for North America (NA-MAAB) Style Guidelines Working Group and has been active in the development of MISRA-C compliance documentation. He holds a B.S.A.E. and M.S.A.E. from Virginia Tech.
Mohammad Muquit is a senior consultant who works with companies in the biotech, pharmaceutical, industrial machinery, and automotive industries on a wide range of solutions involving image processing, computer vision, parallel and distributed computing, statistical analysis, and Model-Based Design. Mohammad has 76 patents submitted (12 accepted and 64 pending) related to methods and devices regarding biometric authentication and identification, parallel processing systems, binary image processing, and 3-D biometrics. He received a Bachelor’s degree in computer engineering, an M.Sc. in system information science, and a Ph.D. in computer and mathematical science from Tohoku University, Japan.
A Sub-Pixel Correspondence Search Technique for Computer Vision Applications (Conference paper)
Paul Peeling is a consultant engineer who specializes in signal processing, machine learning, and code generation for embedded hardware. He works with MATLAB and Simulink users to develop algorithms and model systems in multiple domains, and deploy the code to real-time targets. Prior to joining MathWorks, Paul worked applying pattern recognition techniques to detect and combat online fraud. Paul has a Ph.D. in statistical signal processing from the University of Cambridge.
Paul Smith directs the worldwide MathWorks Consulting Services organization. Prior to joining MathWorks, Paul managed the development and delivery of select engine and transmissions controls systems and software at Ford Motor Company. Before his work at Ford, he served as a nuclear engineering officer in the United States Navy. Paul received his BSEE from Michigan Technological University and an MSECCS from Wayne State University. He is a graduate of the U.S. Naval Nuclear Power School and Naval Officer Candidate School. He holds 13 U.S. patents and is a recipient of the Henry Ford Technology award.
Pete Maloney is a senior principal technical consultant with 24 years of industry experience in advanced engine control design, calibration, and development. Pete is an organizer of the Control System Design and Calibration World Congress Session, and is Chairman of the General Powertrain Development Committee of the Society of Automotive Engineers (SAE). He holds a B.S.M.E. from Texas Tech University and an S.M.M.E. from the Massachusetts Institute of Technology.
Philip Rottier’s background is in naval systems, finance, retail, and the energy industry, both directly in industry-leading organizations and as a MathWorks Consultant. Phil’s work centers on the use of physical modeling to assess performance of electrical power generation, distribution, and propulsion systems. He also specializes in assessing and optimizing logistics and supply chain for through-life support. The common thread in all of Phil’s work is Model-Based performance assessment and decision support for complex systems. Phil is a Chartered Engineer and holds a Ph.D. in physical oceanography and underwater acoustics and an M.A. in engineering, both from the University of Cambridge, UK.
INEC2014: UK Type 26 Global Combat Ship Support Solution Decision Point Project (Conference paper; log-in required)
INEC2012: Application of DEF STAN 61-22 to guide development and verification of an electrical power system model (Conference paper; log-in required)
RINA 2010: Quantifying the through-life cost and performance benefit of technology adoption (Conference paper; log-in required)"
Raymond Estrada is a senior technical consultant with extensive industry experience in guidance, navigation and controls, and code generation for use in an HIL environment. He specializes in helping organizations apply Model-Based Design to develop and deploy embedded software for high-integrity applications that comply with safety standards. Raymond holds a B.S. in aeronautics and astronautics engineering from the Massachusetts Institute of Technology, and an M.S. in aerospace engineering from the University of California, Los Angeles.
Richard Ruff, a principal technical consultant, has over 25 years of experience in the design, modeling, and simulation of vehicles, and development and implementation of flight software in the aerospace and defense industry. Prior to coming to MathWorks, Richard worked at Lockheed Martin Missiles and Fire Control in Dallas in the Guidance and Navigation group. While at Lockheed, Richard led a group of engineers developing flight control software using Simulink and RTW-EC. At MathWorks, Richard helps customers from small start–ups to large international corporations adopt Model-Based Design and leverage MathWorks tools to streamline their design process. Richard earned his B.S. and M.S. degrees in aerospace engineering from Mississippi State University and is the American Institute of Aeronautics and Astronautics (AIAA) SciTech 2017 Forum Technical Discipline Chair for Aerospace Sciences and is a member of the AIAA Modeling and Simulation Technical Committee.
Robyn Jackey is a senior technical consultant with over 12 years’ experience in software development. He advises customers on software architecture with the goals of optimizing performance, reliability, and maintainability. Robyn designs user interfaces for business-critical MATLAB applications that perform data analysis and visualization. He also develops Simulink and Simscape simulations of batteries and electrical systems, and has published a number of related conference papers with SAE International and IEEE. Robyn received B.S and M.S. degrees in electrical engineering from Clarkson University, where he focused on applying software solutions to simulate and visualize control systems. He holds a patent for visualization of computer memory allocations.
Roger Aarenstrup is a senior consultant who works with customers in the automotive, medical, energy production, and industrial automation industries. He helps customers adopt and optimize Model-Based Design methodologies and workflows. With over 15 years’ experience, Roger has worked with modeling and simulation in the aerospace industry, robot control for industrial automation, and has experience in the development of real-time operating systems for telecommunications. He received an M.S. in computer science and engineering from Luleå University of Technology and an M.B.A. in e-business from the University of Gävle.
Processor-In-the-Loop Simulation on Embedded Linux Boards (Technical article)
Roger Theyyunni is a senior technical consultant. He works with companies in the aerospace, defense, automotive, energy production, and industrial automation industries. His areas of expertise include model-based production code generation, hardware-in-loop simulation, rapid prototyping, HDL/FPGAs, hardware and software integration, and hardware/software codesign. He has over 20 years of experience developing real-time systems, particularly for hardware-in-the-loop simulation. Roger holds an M.S. in chemical engineering and an M.A. in computer science from Wayne State University.
Rory Adams is a senior consultant engineer specializing in data analysis, software development, and application deployment. He works with customers to understand and resolve their technical and business challenges with a focus on mathematical modeling, application development, parallel computing, and physical modeling. Rory holds a PhD in theoretical physics and an M.Sc. in applied mathematics from the University of Cape Town, South Africa.
Nonlinearity: Noncoaxial multivortices in the complex sine-Gordon theory on the plane (Journal article; log-in required)
Journal of High Energy Physics: Comments on Noncommutative Sigma Models (Journal article)
Sam Oliver is a consultant engineer who specializes in helping organizations improve their operations and logistics through statistical analysis, along with predictive modeling and simulation. Prior to joining MathWorks, Sam worked for a leading supplier of brake system technology on application development for an electromechanical brake program. He also worked as a university research assistant and conducted research on the verification and integration phases of software development within the automotive industry. He received an M.Eng.Sc. in mechatronics, a B.Eng. in mechanical and manufacturing, and a B.Sc. in computer science from the University of Melbourne, Australia.
Sang-Ho Yoon is a principal technical Consultant in our Korea office. For over 10 years he has worked with customers to design, implement, and verify safety-related embedded software and adopt Model-Based Design. Prior to joining MathWorks, he was a research engineer (systems engineer) in Mando Corporation’s central R&D center developing automotive embedded control systems. He received his B.S. in Mechanical Engineering from Kyung Hee University, and a M.S. in Software Engineering from Korea University. He also holds four patents.
MATLAB Expo 2015: New Approach to Test Management with Simulink Test (51:29) (Korean language presentation)
MATLAB Expo 2014: Model Verification and Code Generation of Controller Model (50:28) (Korean language presentation)
MATLAB Expo 2013: Automatic Code Generation (51:17) (Korean language presentation)
Advanced AC Motor Control Software Development (34:48) (Korean language video)
SAE 2006: Development of Rollover Prevention System Using Unified Chassis Control of ESP and CDC Systems (Conference paper; login required)
SAE 2004: Integration Chassis Control (ICC) Systems of Mando (Conference paper; login required)
Sarah Dagen is a senior technical consultant. She works with organizations to apply Model-Based Design to optimize high-integrity software development processes and product engineering, and to satisfy certification standards. Before joining MathWorks, Sarah worked as a simulation and software specialist at Gulfstream Aerospace where she designed and built pilot-in-the-loop real-time simulation of advanced aircraft designs. Sarah received her B.S. in physics with a concentration in astrophysics from MIT and is a member of the Society of Automotive Engineers and American Physical Society.
Sarah Drewes is a senior consultant who helps customers develop MATLAB based algorithms to meet their business goals. Sarah is a specialist in mathematical modeling and optimization who has experience in solving complex optimization problems in a variety of application areas such as communications, finance, image processing, and automotive. Before joining MathWorks, Sarah was a technical consultant in the telecommunications industry focusing on network modeling and optimization projects. She received a Ph.D. in mathematics from the Technische Universität Darmstadt and a diploma in mathematics from the Technische Universität München. She spent an academic year as a lecturer and postdoctoral associate at the department of industrial engineering and operations research at University of California, Berkeley.
Scott Furry is a senior consultant. He specializes in helping automotive OEMs and suppliers adopt Model-Based Design methodologies and tools for electronic control system engineering. He has worked with companies from a wide range of industries including automotive, aerospace, and defense. Prior to joining MathWorks, Scott developed control systems for General Motors and Bosch. His work includes powertrain controls design, rapid control prototyping, hardware in-the-loop testing, engine calibration, and system modeling. Scott received his B.S. and M.S. in mechanical engineering from the University of Michigan.
Sebastian Malack is a technical consultant who specializes in control systems design and automation, as well as in physical modeling of multidomain systems. He helps organizations apply Model-Based Design to a wide range of applications to tighten their development process and increase productivity and performance. Prior to joining MathWorks, Sebastian worked in the automotive industry, focusing on car access systems and bus system management for combustion and electrical engines. He holds a Dipl.-Ing./M.Eng. in aerospace engineering from the University of Technology, Munich.
Modeling Physical Systems in Teaching - Technology and Didactics (34:52) (Video)
Modeling Physical Systems in Teaching Courses: Technological and Didactical Approaches (33:55) (German language video)
Shawn Bonneau received his B.S. in mechanical engineering from the University of Vermont and his M.Eng in aerospace engineering from Cornell University. He is a technical consultant with a background in guidance, navigation, and controls. Shawn specializes in developing Simulink based tools for custom workflows and modeling environments. He has helped customers in the automotive, biotech, energy, and aerospace industries.
Creating Custom Requirements Link Types (Blog post)
Shige Kakizaki is a senior principal technical consultant in our Japan office. He worked for 21 years at Nissan in engine control development and led their establishment of Model-Based Design in the powertrain (including hybrid systems and electric vehicles) production development process. Shige is a founding member of the Japan MathWorks Automotive Advisory Board (JMAAB) and was instrumental in bringing Model-Based Design to the automotive industry in Japan. He holds over 20 US patents and received his B.Eng. in electronics engineering from Utsunomiya University in Japan.
Shuhei Tozaki is a senior technical consultant in our Japan office. He works with customers in the medical equipment and electronics manufacturing industries to apply Model-Based Design to the design and development of embedded software. As part of a Model-Based Design workflow, Shuhei helps customers with automatic generation of optimized, compact, and readable software code customized to get best use of specific hardware such as a microprocessors, MCUs, DSPs, FPGAs, or GPUs. For nine years at PALTEK Corporation, Shuhei developed and supported FPGA implementations. He received a B.S. in physics and an M.S. in molecular physics from Kitasato University in Japan.
Sota Torii is a senior technical consultant in our Japan office who works with customers in the automotive and industrial automation industries. He helps customers adopt Model-Based Design, model verification and validation, plant modeling, and application development. He received his B.Eng. in electronic engineering from Tokyo Metropolitan University and holds one world patent and three patents in Japan. At Honda, he worked for 13 years in automotive manufacturing production engineering focusing on heat transfer, fluid dynamics, and control design using a Model-Based Design approach for manufacturing systems.
Sylvain Lacaze is a consultant engineer who specializes in design optimization, reliability analysis, application deployment, and adaptive machine learning techniques. He works with customers to build predictive models using machine learning, deploy MATLAB algorithms as part of web, database, desktop, and enterprise applications, and access and analyze big data in MATLAB. He holds a B.Eng. from the French Institute of Advanced Mechanics, a Master’s Degree in Mechanical Engineering from Blaise Pascal University, and a Ph.D. in Aerospace and Mechanical Engineering with a minor in Statistics from the University of Arizona.
Teja Muppirala is a senior technical consultant in our Japan office. He works with customers in a range of industries including automotive, heavy industry, and biomedical to develop applications for data analysis, design optimization, analysis and modeling of data using statistics, and image and signal processing. Before joining MathWorks, Teja worked at Nikon as a mechanical engineer analyzing mechanical vibrations and developing control systems for steppers. Teja received his B.S. in engineering math from the University of Arizona and an M.S. in mechanical engineering from the University of Illinois at Urbana-Champaign.
Thomas Deck received his Bachelor of Science in information technology from the Baden-Wuerttemberg Cooperative State University Mannheim. During this time he also worked at Forschungszentrum Karlsruhe on ultrasound-computertomography involving data acquisition and online image reconstruction. At GE he was a C++ developer working on user interfaces for ultrasound workstations. As a MathWorks senior consultant, Thomas works with companies in the automotive, energy production, medical device, and manufacturing industries to deploy generated code to custom targets and verify high-integrity C and C++ embedded software.
Generating Custom Reports with MATLAB Report Generator (Technical article)
Tim Johns is a consultant engineer with an aerospace and automotive background who focuses on Model-Based Design and code generation. Tim received his B.A. and M.Eng. degrees in Aerospace and Aerothermal Engineering from the University of Cambridge, and a subsequent PhD, also from Cambridge, in the mathematical modeling and simulation of a racing driver’s steering and speed control. Prior to joining MathWorks, he worked at Renault Sport F1 Team aiding the running and development of the driver-in-the-loop simulator for virtual testing and target setting
Vehicle System Dynamics: Measurement and mathematical model of a driver's intermittent compensatory steering control(Journal article)
Titus Edelhofer leads the German Consulting Services team. He works with companies in the finance, energy trading and production, and automotive industries on a wide range of applications to automate business processes, reduce development time, and integrate MATLAB solutions into business-critical applications. Titus holds an M.S. and a Ph.D. in mathematics from the Technical University in Aachen, Germany.
Tom Egel is a principal technical consultant who specializes in physical modeling of multidomain systems using Simscape and Simulink physical modeling products. He has over 25 years of experience with modeling and simulation of physical systems, and is a contributing author to the book The System Designer’s Guide to VHDL-AMS (Morgan Kaufmann, 2003). He holds a B.S. in electrical engineering from Washington University and a B.A. in physics from St. Louis University.
Tomohiko Higashi is a senior technical consultant engineer who works with companies in the automotive, industrial machinery, energy production, earth sciences, rail, biotech, and pharmaceutical industries. His current focus is on solutions involving Model-Based Design, verification and validation, big data analysis, statistical analysis, and parallel and distributed computing. Tomohiko received his B.Eng. and M.Eng. in information engineering from Osaka University, Japan.
Dr. Ulrich Wahner is a team lead and principal consultant. He specializes in applying Model-Based Design to production code generation and verification and validation techniques in the automotive and industrial automation industries. Prior to joining MathWorks, Ulrich worked as an R&D engineer at the Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen University Laboratory for Machine Tools (WZL). He concentrated on the design and simulation of automated control systems with implementation on digital signal processors while earning his Ph.D. in mechanical engineering from RWTH Aachen University. Ulrich currently focuses on customer jumpstarts and specialized coaching sessions, certification advisories, and process assessments.
Vinod Reddy is a manager in MathWorks Consulting Services. He specializes in helping organizations apply Model-Based Design to develop and verify embedded systems. He works with companies in the aerospace, defense, telecommunications, and automotive industries on a wide range of applications to improve related development processes. Vinod has over 20 years of industry experience in developing embedded software including extensive work in control system design, embedded software and systems, and code generation tools.
Yuji Amano manages the Consulting Services team in Japan. He works with automotive, industrial machinery, and energy companies in all aspects of Model-Based Design deployment with an emphasis on controls modeling, verification and validation, and code generation. Prior to joining MathWorks, he worked at Yokogawa Electric Corporation evaluating and deploying logic synthesis ASIC design methodology and at Cybernet Systems supporting JMAAB and major production users. Yuji earned a B.Eng. and M.Eng. in mechanical engineering from Sophia University and holds 2 patents.
Yoshio Watanabe is a senior consultant engineer in our Japan office. He helps customers assess their Model-Based Design methodologies and optimize tool workflows for rapid control prototyping, code generation, and verification and validation activities. Before joining MathWorks, Yoshio worked at dSPACE as an application engineer doing HIL, test automation, and Model-Based Design toolchain improvement for top Japanese automotive OEMs. Yoshio holds a Mechanical Engineering degree from Sophia University and from 2012 to 2016 was a JITEC examiner within IPA to administer the ITEE.
Zhihui Li is a senior technical consultant who works with companies in the automotive and commercial vehicles industry to implement Model-Based Design and address electronic control unit development. Zhihui specializes in embedded code generation, system integration, and tools customization. With 10 years of automotive industry experience, Zhihui worked for CARTAC, Delphi, and Valeo before joining MathWorks. Zhihui holds a B.S. in automation from Inner Mongolian University and an M.S. in automation from Tianjin University.