MATLAB and PSpice for Electronic Circuits

Version 1.0.0.0 (4.54 MB) by Won Yang
Examples present analytical solutions with MATLAB analysis and PSpice simulation
3.9K Downloads
Updated 24 Nov 2017

View License

CHAPTER 1: LOAD LINE ANALYSIS AND FOURIER SERIES
1.1 LOAD LINE ANALYSIS
1.1.1 Load Line Analysis of a Nonlinear Resistor Circuit
1.1.2 Load Line Analysis of a Nonlinear RL Circuit
1.2 FOURIER SERIES
1.2.1 Computation of Fourier Coefficients Using Symmetry0
1.2.2 Circuit Analysis Using Fourier Series
1.2.3 RMS Value and Distortion Factor of a Non-Sinusoidal Periodic Signal
CHAPTER 2: DIODE CIRCUITS
2.1 THE V-I CHARACTERISTIC OF DIODES
2.1.1 Large-Signal Diode Model for Switching Operations
2.1.2 Small-Signal Diode Model for Amplifying Operations
2.2 ANALYSIS/SIMULATION OF DIODE CIRCUITS
2.2.1 AND Gate
2.2.2 Clipper/Clamper Circuits
2.2.3 Half-Wave Rectifier
2.2.4 Half-Wave Rectifier with Capacitor Filter3
2.2.5 Full-Wave Rectifier with LC Filter
2.2.6 Small-Signal (AC) Analysis of Diode Circuits
2.3 ZENER DIODES
CHAPTER 3: TRANSISTOR CIRCUITS
3.1 BJT
3.1.1 Ebers-Moll Representation of BJT
3.1.2 Operation Modes of BJT
3.1.3 Parameters of BJT
3.1.4 Common-Base Configuration
3.1.5 Common-Emitter Configuration
3.1.6 Large-Signal (DC) Model of BJT
3.1.7 Small-Signal (AC) Model of BJT
3.1.8 Analysis of BJT Circuits
3.1.9 BJT Used as a Diode
3.1.10 BJT Switch/Inverter
3.1.11 Emitter-Coupled or Differential Pair
3.2 BJT AMPLIFIER CIRCUITS
3.2.1 Common-Emitter Amplifier
3.2.2 Common-Collector Amplifier
3.2.3 Common-Base Amplifier
3.2.4 Cascaded Multi-Stage BJT Amplifier
3.2.5 Compound/Composite Multi-Stage BJT Amplifier
3.3 LOGIC GATES USING DIODES/TRANSISTORS
3.3.1 DTL NAND Gate
3.3.2 TTL NAND Gate
3.3.3 ECL OR/NOR Gate
3.4 FET
3.4.1 JFET
3.4.2 MOSFET
3.4.3 MOSFET Used as a Resistor
3.4.4 MOSFET Inverter
3.4.5 CMOS Logic Circuits
3.5 FET AMLIFIER
3.5.1 Common-Source Amplifier
3.5.2 Common-Drain Amplifier
3.5.3 Common-Gate Amplifier
3.5.4 Common-Source Amplifier with FET Load
3.6 DESIGN OF TRANSISTOR AMPLIFIER
3.6.1 Design of BJT AMplifier
3.6.2 Design of FET Amplifier
CHAPTER 4: OP AMP CIRCUITS
4.1 OP AMP BASICS
4.2 OP AMP CIRCUITS WITH RESISTORS
4.2.1 OP Amp Circuits with Negative Feedback
4.2.2 OP Amp Circuits with Positive Feedback
4.3 FIRST-ORDER OP AMP CIRCUITS
4.3.1 First-Order OP Amp Circuits with Negative Feedback
4.3.2 First-Order OP Amp Circuits with Positive Feedback
4.3.3 555 Timer Using OP Amp as Comparator
4.4 SECOND-ORDER OP AMP CIRCUITS
4.4.1 MFB (Multi-Feedback) Topology
4.4.2 Sallen-Key Topology
4.5 ACTIVE FILTERS
4.5.1 First-Order Active Filter
4.5.2 Second-Order Active LPF/HPF
4.5.3 Second-Order Active BPF
4.5.4 Second-Order Active BSF
CHAPTER 5: ANALOG FILTER
5.1 ANALOG FILTER DESIGN
5.2 PASSIVE FILTER REALIZATION
5.2.1 LPF
5.2.2 HPF
5.2.3 BPF
5.2.4 BSF
5.2.5 Frequency Scaling and Transformation
5.2.6 Multistage LC Filter
5.2.7 L-Type Impedance Matcher
5.2.8 T- and -Type Impedance Matchers
5.3 ACTIVE FILTER REALIZATION

Cite As

Won Yang (2024). MATLAB and PSpice for Electronic Circuits (https://www.mathworks.com/matlabcentral/fileexchange/40988-matlab-and-pspice-for-electronic-circuits), MATLAB Central File Exchange. Retrieved .

MATLAB Release Compatibility
Created with R2011a
Compatible with any release
Platform Compatibility
Windows macOS Linux
Communities

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
Version Published Release Notes
1.0.0.0

This file has been updated on 11/24/2017 so that it can be opened with no code.