extract data from a loop
16 views (last 30 days)
Show older comments
Oday Shahadh
on 4 Jun 2020
Answered: Oday Shahadh
on 5 Jun 2020
Hi Guys,
Can any body help on how extract and plot data from this?
clc
clear
close all
format long
mu0=4*pi*10^-7;
R=0.9;
N=17;
I=12.5;
for z=-1.5:0.01:1.5;
B1=((mu0*N*I*R^2)/2)*(1/(R^2+(z+(R/2))^2)^(3/2));
B2=((mu0*N*I*R^2)/2)*(1/(R^2+(z-(R/2))^2)^(3/2));
Bt=B1+B2;
figure(1)
plot(z,B1); hold on;grid on
plot(z,B2); hold on;grid on
plot(z,Bt); hold on;grid on
end
0 Comments
Accepted Answer
Shubhankar Poundrik
on 5 Jun 2020
Hi Oday,
I understand that you are finding difficulty in keeping each value of the variables generated in the loop saved. Additionally, the plot generated by your code is blank and does not show the plots.
Data created in a loop can be extracted by saving it to an array. The entire data can then be plotted from the array itself, rather than plotting it point wise in the loop. The ‘hold on’ command may be used once before adding all the plots. Then the ‘hold off’ command should be used.
The below code may help.
clc
clear
close all
format long
mu0=4*pi*10^-7;
R=0.9;
N=17;
I=12.5;
z2 = -1.5:0.01:1.5;
elm = length(z2);
B1arr = zeros(1, elm); % creating array to add B1 to in the loop
B2arr = zeros(1, elm); % creating array to add B2 to in the loop
Btarr = zeros(1, elm); % creating array to add Bt to in the loop
i=1;
for z=-1.5:0.01:1.5
B1=((mu0*N*I*R^2)/2)*(1/(R^2+(z+(R/2))^2)^(3/2));
B2=((mu0*N*I*R^2)/2)*(1/(R^2+(z-(R/2))^2)^(3/2));
Bt=B1+B2;
B1arr(1,i ) = B1; % adding B1 to array
B2arr(1,i ) = B2; % adding B2 to array
Btarr(1,i ) = Bt; % adding Bt to array
i=i+1;
end
hold on
plot(z2, B1arr, 'b')
plot(z2, B2arr, 'r')
plot(z2, Btarr, 'g')
hold off
Regards,
Shubhankar
0 Comments
More Answers (3)
KSSV
on 5 Jun 2020
Edited: KSSV
on 5 Jun 2020
clc
clear
close all
format long
mu0=4*pi*10^-7;
R=0.9;
N=17;
I=12.5;
Z=-1.5:0.01:1.5;
B1 = zeros(size(Z)) ;
B2 = zeros(size(Z)) ;
for i = 1:length(Z)
z = Z(i) ;
B1(i)=((mu0*N*I*R^2)/2)*(1/(R^2+(z+(R/2))^2)^(3/2));
B2(i)=((mu0*N*I*R^2)/2)*(1/(R^2+(z-(R/2))^2)^(3/2));
end
Bt = B1+B2 ;
figure
hold on
plot(Z,B1,'r')
plot(Z,B2,'b')
plot(Z,Bt,'g')
Note that, there is no requirement of using a loop. You can achieve what you want without loop also.
clc
clear
close all
format long
mu0=4*pi*10^-7;
R=0.9;
N=17;
I=12.5;
z=-1.5:0.01:1.5;
B1=((mu0*N*I*R^2)/2)*(1./(R^2+(z+(R/2)).^2).^(3/2));
B2=((mu0*N*I*R^2)/2)*(1./(R^2+(z-(R/2)).^2).^(3/2));
Bt = B1+B2 ;
figure
hold on
plot(z,B1,'r')
plot(z,B2,'b')
plot(z,Bt,'g')
3 Comments
madhan ravi
on 5 Jun 2020
Edited: madhan ravi
on 5 Jun 2020
No loops needed:
mu0=4*pi*10^-7;
R=0.9;
N=17;
I=12.5;
z=-1.5:0.01:1.5;
B1=((mu0*N*I*R^2)/2).*(1./(R^2+(z+(R/2)).^2).^(3/2));
B2=((mu0*N*I*R^2)/2).*(1./(R^2+(z-(R/2)).^2).^(3/2));
Bt=B1+B2;
figure(1)
plot(z,B1,'k')
hold on
grid on
plot(z,B2,'b')
plot(z,Bt,'m')
0 Comments
See Also
Categories
Find more on Loops and Conditional Statements in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!