Hi all,
I'm working with 'Vehicle Network Toolbox' in Simulink. My model is depicted in the following:
, where the 'Configuration' and 'Receive' block have following settings:
, . The problem is that if 'CAN Msg' is readout, the signals 'CAN Receive/2.Data:7' and 'CAN Receive/2.Data:8' are constantly zero.
However, these signals must be non-zero which can be confirmed in different CAN-Bus tools. Moreover, if 'canTool' is applied in Matlab, the change of the 'Data' can be monitored:
If 'Out1' is readout in the Simulink model, the signals 'Function-Call Subsystem:7' and 'Function-Call Subsystem:8' are constantly zero again.
The block 'function()' is modeled as follows:
Thank you for your help!
Best regards,
Jochen