SRS in Uplink Carrier Waveform Generation
3 views (last 30 days)
Show older comments
Javier Sola morras
on 25 Apr 2020
Commented: Sriram Tadavarty
on 8 May 2020
Taking the example of toolbox 5g Uplink Carrier Waveform Generation (https://es.mathworks.com/help/5g/gs/uplink-carrier-waveform-generation.html), when running the simulation the SRS is not represented. What is the reason?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/287459/image.png)
0 Comments
Accepted Answer
Sriram Tadavarty
on 27 Apr 2020
Hi,
Its because in the SRS Instances configuration, the Enable field is set to 0. Here is the code that is present in that section
srs = struct();
srs(1).Enable = 0; % Enable SRS config
% Update the above line with
srs(1).Enable = 1; % Value of 0 is changed to 1
Now run the example and output will display the SRS pattern.
Hope this helps.
Regards,
Sriram
4 Comments
Sriram Tadavarty
on 8 May 2020
SRS signal characteristics depends on the other parameters in the srs structure. If the AllocatedPRB is increased, only the RE in frequency domain having SRS will be increased, but doesn't change SRS pattern.
More Answers (0)
See Also
Categories
Find more on Uplink Physical Signals in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!