sine fit in matlab vs closed-form expressions (linear least squares)
9 views (last 30 days)
Show older comments
Thales
on 16 May 2019
Edited: David Goodmanson
on 17 May 2019
Given the arrays:
t = 0:0.25:2;
y = [3.0800 3.4900 3.1500 2.2300 1.2300 0.6900 0.8900 1.7300 2.7600];
The y array was created based on the expression 2+sin(3*t)+cos(3*t), added some noise and truncated to 2 decimal places.
We want to obtain the parameters of the model
y = A0 + A1*cos(w0*t) + B1*sin(w0*t)
This is a Fourier analysis, of course, but we want to study it in a least squares sense.
If we have N observations equispaced at intervals dt and a total record length T=(N-1)*dt, the coefficients can be determined as:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/219844/image.png)
(Chapra, Applied Numerical Methods with Matlab, 4th ed)
So I code:
N = length(t)
A0 = sum(y)/N
A1 = 2*sum(y.*cos(3*t))/N
B1 = 2*sum(y.*sin(3*t))/N
And get the results
N =
9
A0 =
2.138888888888889
A1 =
1.337796008190744
B1 =
0.868485945765937
If A is a rectangular m-by-n matrix with m ~= n, and B is a matrix with m rows, then A\B returns a least-squares solution to the system of equations Ax= B.*
I can code, then:
X = [ones(length(t),1) (cos(w0*t)).' (sin(w0*t)).']
a = X\(y.')
Which gives me the results:
a =
2.079400007449057
0.999055551110904
1.000625226465150
Those results are not the same as the ones obtained before. What am I missing here? Why those results are not the same?
I suspect I can not use the closed form expressions, but why exactly?
0 Comments
Accepted Answer
David Goodmanson
on 16 May 2019
Edited: David Goodmanson
on 17 May 2019
Hi Thales,
Before doing the least squares calculation it makes sense to try the less ambitious result of finding the right amplitudes without any added noise. Your time array has N = 9 points, and an array spacing of delt = 1/4 sec. The formulas only work if the fourier components are periodic with period T = N*delt. So the frequencies are multiples of w0 = 2*pi/T = 8*pi/9 ~~ 2.79. You are using w = 3 which isn't commensurate with w0, so you can't expect a fourier contribution at just one frequency, or that the fourier coefficient = 1.
N = 9;
x = (0:N-1)*(1/4);
w0 = 8*pi/9;
y = cos(x*w0); % good results
(1/N)*sum(y)
(2/N)*sum(cos(x*w0).*y)
(2/N)*sum(cos(2*x*w0).*y)
(2/N)*sum(sin(x*w0).*y)
(2/N)*sum(sin(2*x*w0).*y)
% etc
ans = -8.6351e-17
ans = 1.0000
ans = -3.7007e-17
ans = 1.4803e-16
ans = -2.4672e-17
y = cos(x*3); % bad results
(1/N)*sum(y)
(2/N)*sum(cos(x*w0).*y)
(2/N)*sum(cos(2*x*w0).*y)
(2/N)*sum(sin(x*w0).*y)
(2/N)*sum(sin(2*x*w0).*y)
% etc
ans = 0.0695
ans = 1.0040
ans = -0.0492
ans = -0.2224
ans = 0.0210
4 Comments
John D'Errico
on 17 May 2019
Edited: John D'Errico
on 17 May 2019
Another way of looking at this is to note that
omega = 3;
t = 0:0.25:2;
dot(cos(omega*t),sin(omega*t))
ans =
-0.09224
So over that interval, cos(omega*t) and sin(omega*t) are not orthogonal.
However, now change t.
t = linspace(0,2*pi,10);
dot(cos(omega*t),sin(omega*t))
ans =
7.2164e-16
they are now orthogonal. Those formulas are only valid if we have orthogonality.
David Goodmanson
on 17 May 2019
Edited: David Goodmanson
on 17 May 2019
John makes a good point, but to demonstrate orthogonality in general, one has to be careful about the length of the array.
The extent of the time array here is 0 to 2*pi, so the fundamental frequency is omega0 = 1. Linspace(0,2*pi,10) does not represent a periodic array, because for the trig functions the last value is identical to the first value, meaning that one of the waveform points is listed twice. That works ok to show orthogonality if at least one of the basis functions is a sine function, since sin() = 0 at the end point, but not for two cos functions.
To create a periodic array, the last point in t needs to go away, leaving nine points.
t = linspace(0,2*pi,10);
omega0 = 1;
dot(cos(3*omega0*t),sin(3*omega0*t))
dot(cos(3*omega0*t),cos( omega0*t))
% ans = 7.0850e-16
% ans = 1.0000 % not 0
t(end) = []; % periodic array
dot(cos(3*omega0*t),sin(3*omega0*t))
dot(cos(3*omega0*t),cos( omega0*t))
% ans = 1.4433e-15
% ans = -1.7764e-15
More Answers (0)
See Also
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!