How to separate signals with diffrent frequencies
19 views (last 30 days)
Show older comments
Srey
on 1 Jan 2015
Commented: aarthi arunachalam
on 11 Mar 2016
t = linspace(0, 1, 1001);
x=sin(2*pi*t*3) + sin(2*pi*t*6) + sin(2*pi*t*10)+sin(2*pi*t*13)+sin(2*pi*t*20)+sin(2*pi*t*50)+sin(2*pi*t*100)+sin(2*pi*t*200);
% my signal with frequencies 3,6,10,13,20,50,100,200 KHz
sigma=0.1;
y=x+randn(size(x)).*sigma; % adding noise
I filtered the signal using fft.
I want to separate signals.
Eg : from my original signal, I want a signal with frequency range say 3 to 8 KHz, another signal say from 100 to 200 KHz. How can I separate them and display those signals.How can I do this. Anybody Please help me to solve this.?
2 Comments
aarthi arunachalam
on 11 Mar 2016
i too want to seperate certain frequency range from my original signal. can you help me?
Accepted Answer
Shoaibur Rahman
on 1 Jan 2015
Add the following lines of code at the bottom of your code (after y=x+randn(size(x)).*sigma;):
ffty = fft(y);
ffty = abs(ffty(1:ceil(length(y)/2)));
ffty(ffty<100)=0;
[~,locs] = findpeaks(ffty);
freqs = (locs-1)/t(end)
signal_1 = sin(2*pi*t*freqs(1))+sin(2*pi*t*freqs(2))+sin(2*pi*t*freqs(3)); % 3-10
signal_2 = sin(2*pi*t*freqs(6))+sin(2*pi*t*freqs(7)); % 50-100
subplot(211), plot(t,signal_1)
subplot(212), plot(t,signal_2)
10 Comments
Shoaibur Rahman
on 1 Jan 2015
Edited: Shoaibur Rahman
on 1 Jan 2015
Use any sinusoidal function to generate a signal with that frequency, and then plot that against time. For example:
t = .....
out1 = sin(2*pi*f1*t);
out2 = cos(2*pi*f2*t);
etc....
This is just from the Fourier analysis, that states any signal (with some criteria) can be represented as summation of infinite sinusoidal functions. So, to represent only one frequency, use one sinusoidal function, or to represent multiple frequency components, use summation of multiple sinusoidal functions with those frequencies.
More Answers (1)
Pourya Alinezhad
on 1 Jan 2015
1-you can use several filters with different center frequencies (chebishev or butter filter)
h = fdesign.bandpass('N,F3dB1,F3dB2', N, Fc1, Fc2, Fs);
Hd = design(h, 'butter');
filter (Hd,input_signal);
2- you can use an adaptive filter and feed the signal and the desired signals to it (LMS filter).
2 Comments
Pourya Alinezhad
on 1 Jan 2015
assign Fc1, Fc2 values as 3 and 10Kz for a filter. then make another filter with 50 to 100 kHz spectrum.
See Also
Categories
Find more on Filter Analysis in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!