loop calculation and skipping the numbers

2 views (last 30 days)
YOGESHWARI PATEL
YOGESHWARI PATEL on 6 Dec 2021
Commented: Star Strider on 8 Dec 2021
Ran in:
d=20;
h=2;
g=9.8;
u=zeros(1)
u = 0
v=zeros(1)
v = 0
for x=[1 6 11 16 21 ]
for t=[1 6 11 16 21 26 31]
u(x,t)=h*sqrt(g/d)*(sech((sqrt(3*h/4*d^3))*(((x-1)/10)-(sqrt(g/d)*(1+(h/2*d))*((t-1)/10)))))^2;
v(x,t)=h*(sech((sqrt(3*h/4*d^3))*((x-1/10)-(sqrt(g/d)*(1+(h/2*d))*(t-1/10)))))^2;
end
end
disp(u)
Columns 1 through 22 1.4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Columns 23 through 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
disp(v)
1.0e-220 * Columns 1 through 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.1605 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Columns 23 through 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
I use this code to evaluate the value of u and v at different x and t .I want to skip the values so i wish this code .But all the values are not displayed.

Sign in to answer this question.

Accepted Answer

Star Strider
Star Strider on 6 Dec 2021
Ran in:
The indexing is incorrect. It leaves gaps. The gaps can be eliminated with a more efficient indexing approach.
This fixes that problem, however other problems may remain.
d=20;
h=2;
g=9.8;
% u=zeros(1)
% v=zeros(1)
xv=[1 6 11 16 21 ];
tv=[1 6 11 16 21 26 31];
u = NaN(numel(xv), numel(tv));
v = NaN(numel(xv), numel(tv));
for k1 = 1:numel(xv)
x = xv(k1);
for k2 = 1:numel(tv)
t = tv(k2);
u(k1,k2)=h*sqrt(g/d)*(sech((sqrt(3*h/4*d^3))*(((x-1)/10)-(sqrt(g/d)*(1+(h/2*d))*((t-1)/10)))))^2;
v(k1,k2)=h*(sech((sqrt(3*h/4*d^3))*((x-1/10)-(sqrt(g/d)*(1+(h/2*d))*(t-1/10)))))^2;
end
end
disp(u)
1.4000 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0.0000 0 0 0 0 0 0
disp(v)
1.0e-220 * 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.1605 0 0 0 0 0 0 0.0000 0 0 0 0 0 0 0 0 0 0 0 0 0
.
  2 Comments
YOGESHWARI PATEL
YOGESHWARI PATEL on 8 Dec 2021
u = NaN(numel(xv), numel(tv));
v = NaN(numel(xv), numel(tv));
for k1 = 1:numel(xv)
x = xv(k1);
for k2 = 1:numel(tv)
can you exaplain the above four lines
Star Strider
Star Strider on 8 Dec 2021
Preallocating the matrices, then referencing the variables as elements of the original variable vectors.

Sign in to comment.

More Answers (0)

Categories

Find more on Loops and Conditional Statements in Help Center and File Exchange

Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!