Preview live video data from IP camera
preview(cam) creates a preview window that
displays live video data for
The preview window shows a live image from the IP camera and displays
the camera URL, resolution, frame rate, magnification, and the timestamp.
Preview your IP camera images before acquiring snapshots.
Create an object,
cam, using the URL
of the IP camera. The URL address must be for a Motion JPEG (
HTTP or RTSP stream, so the URL must start with
For information about finding the URL, see Tips for Finding the IP Camera URL.
cam = ipcam('http://172.28.17.104/video/mjpg.cgi')
cam = Display Summary for ipcam: URL: 'http://172.28.17.104/video/mjpg.cgi' Username: '' Password: '' Timeout: 10
Preview the image from the camera.
The preview window opens and displays live video stream from your camera. The banner of the preview window shows the camera URL. You can see in the graphic that the URL matches what was used to create the object. The lower portion of the window shows the timestamp in seconds, resolution, the frame rate in frames per second, and the magnification. The timestamp and other information shown inside the frame are not part of the preview window; they are part of the display of that particular camera. Your camera may display something similar, or not display anything inside the frame. That display generally can be set from the camera properties, outside of MATLAB®.
After you preview the image, the next step is to acquire images