Model Configuration ARM Cortex-A9 Hardware Boards and QEMU

Hardware Implementation Pane Overview

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to ARM Cortex-A9 (QEMU).

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane (Simulink).

Operating system options

Parameter	Description	Default Value
Base Rate Task Priority	Sets the static priority of the base rate task in the operating system.	40

Clocking

Parameter	Description	Default Value
CPU Clock Frequency	The CPU clock frequency in MHz.	400

Build Options

Parameter	Description	Default Value
Build action	Defines how Embedded Coder® responds when you build your model.	Build, load, and run

External Mode

Parameter	Description	Default Value
Communication interface	Transport layer used to exchange data between the development computer and hardware.	TCP/IP
Run external mode in a background thread	Force the external mode engine in the generated code to execute in a background task.	disabled
Verbose	Enable view of the external mode execution progress and updates in the Diagnostic Viewer.	disabled