Main Content

Build action

Simulink Coder build operation for model

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Build options

Description

The Build action parameter defines how Simulink® Coder™ responds when you press Ctrl+B or click Build Model to build your model.

Dependencies

None

Settings

Build, load, and run (default) | Build
Build, load, and run

With this option, pressing Ctrl+B or clicking Build Model:

  1. Generates code from the model

  2. Compiles and links the code into an executable with libraries

  3. Loads the executable and libraries into the ARM® Cortex®-A9 hardware boards or QEMU

  4. Runs the executable in the ARM Cortex-A9 hardware boards or QEMU

Build

With this option, pressing Ctrl+B or clicking Build Model:

  1. Generates code from the model

  2. Compiles and links the code into an executable with libraries

This option does not load and run the executable on the ARM Cortex-A9 hardware boards or QEMU.

Examples

expand all

  1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to ARM Cortex-A9 (QEMU) and click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. From the Build options group, select a Build action from the drop down list and click Apply.

  5. Click OK to close the dialog box.

Recommended Settings

ApplicationSetting
DebuggingBuild_load_and_run
TraceabilityNo impact
EfficiencyNo impact
Safety precautionNo impact

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b