Three-Phase Custom Transforms

Open Model

This example shows a comparison of three-phase transforms.

There are four transforms:

  • Park transform with rotating reference frame

  • Park transform with stationary reference frame

  • Park transform with synchronous reference frame

  • Clarke transform

For more information on each, double-click the block of interest and read the block mask.

Open Model and Set Circuit Parameters

View Results

To view full results, run the simulation, and enter at the MATLAB® command prompt:

  sscexplore(CustomTransforms_simlog)

Results from Real-Time Simulation

This example has been tested on these platforms:

  • Speedgoat™ Performance real-time target machine with an Intel® 3.5 GHz i7 multi-core CPU and 4 GB RAM.

  • dSPACE® SCALEXIO LabBox with Intel® Core XEON E3-1275v3 at 3.5GHz and 4 GB RAM.

You can run this model in real time with a step size of 30 microseconds by using the Simscape local solver. For small sample rates, a task overrun might occur during the initial task execution due to a cold cache. To avoid this overrun, if the selected platform supports these options, relax the start-up behavior by specifying a limited number of task overruns or increasing the sample time of periodic tasks during the start-up phase of the real-time application.

See Also

Topics