Check starting point of internal transition in Stateflow
Guideline: jc_0760: Starting point of internal transition
Identifies if in all state charts and flow charts, internal transitions from state boundaries must start from the left edge of the state.
This check requires a Simulink® Check™ and Stateflow® license.
This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — a
JMAAB — a
Results and Recommended Actions
|Starting point of one or more internal transitions from state boundaries of state charts or flow charts does not start from the left edge of the state.
|Make sure that in all the state charts and flow charts, internal transitions from state boundaries must start from the left edge of the state.
Capabilities and Limitations
Runs on library models.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to
Allows exclusions of blocks and charts.
This check is supported by edit-time checking.