Check signal flow in model
Guideline: db_0141: Signal flow in Simulink® models
Identify subsystems with inappropriate signal flow. The signal flow in the models and subsystems should be from left to right.
This check requires a Simulink Check™ license.
Results and Recommended Actions
|db_0141_a: Check placement of sequential block
|The placement of blocks in subsystems is distorted.
The signal flow in the mentioned subsystems must be from left to right.
All sequential blocks, except the blocks on feedback path, must be placed from left to right.
All blocks, except the blocks on feedback path, must be oriented to the right.
|db_0141_b: Check placement of parallel blocks
|One or more groups of blocks are not arranged from top to bottom.
|Arrange the groups of blocks or subsystems vertically from top to bottom.
Capabilities and Limitations
Runs on library models.
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to
Allows exclusions of blocks and charts.