Check operator order of Product blocks
Guideline: jc_0610: Operator order for multiplication and division block
Checks the operator order of product blocks.
This check requires a Simulink® Check™ license.
This check contains sub-checks that correspond to sub IDs specified in the MAB and JMAAB modeling guidelines. You can use the Model Advisor Configuration Editor to specify which sub IDs (one or multiple) to execute.
For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:
NA-MAAB — No recommendations
JMAAB — a, b
Results and Recommended Actions
|Guideline Sub ID
|jc_0610_a: Check first input to Product block
|Improper usage of operator order of Product blocks.
|Change the first input in Product block to multiplication('*').
|jc_0610_b: Check number of inputs to Product blocks
|Product blocks have invalid number of inputs.
|Do not have more than two inputs for the Product blocks.
Capabilities and Limitations
Supports selection of Guideline Sub IDs.
Runs on library models.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to
Allows exclusions of blocks and charts.
This check is supported by edit-time checking.