## Fixed Step Solvers in Simulink

*Fixed-step solvers* solve the model at regular time
intervals from the beginning to the end of the simulation. The size of the interval is known
as the step size. You can specify the step size or let the solver choose the step size.
Generally, a smaller the step size increases the accuracy of the results but also increases
the time required to simulate the system.

### Fixed-Step Discrete Solver

The fixed-step discrete solver computes the time of the next simulation step by adding
a fixed step size to the current time. The accuracy and the length of time of the
resulting simulation depends on the size of the steps taken by the simulation: the
smaller the step size, the more accurate the results are but the longer the simulation
takes. By default, Simulink^{®} chooses the step size or you can choose the step size yourself. If you
choose the default setting of `auto`

, and if the model has
discrete sample times, then Simulink sets the step size to the fundamental sample time of the model. Otherwise,
if no discrete rates exist, Simulink sets the size to the result of dividing the difference between the
simulation start and stop times by 50.

### Fixed-Step Continuous Solvers

The fixed-step continuous solvers, like the fixed-step discrete solver, compute the next simulation time by adding a fixed-size time step to the current time. For each of these steps, the continuous solvers use numerical integration to compute the values of the continuous states for the model. These values are calculated using the continuous states at the previous time step and the state derivatives at intermediate points (minor steps) between the current and the previous time step.

**Note**

Simulink uses the fixed-step discrete solver for a model that contains no states or only discrete states, even if you specify a fixed-step continuous solver for the model.

Simulink provides two types of fixed-step continuous solvers — explicit and implicit.

The difference between these two types lies in the speed and the stability. An implicit solver requires more computation per step than an explicit solver but is more stable. Therefore, the implicit fixed-step solver that Simulink provides is more adept at solving a stiff system than the fixed-step explicit solvers. For a comparison of explicit and implicit solvers, see Explicit Versus Implicit Continuous Solvers.

#### Fixed-Step Continuous Explicit Solvers

Explicit solvers compute the value of a state at the next time step as an explicit function of the current values of both the state and the state derivative. A fixed-step explicit solver is expressed mathematically as:

$$x(n+1)=x(n)+h\ast Dx(n)$$

where

*x*is the state.*Dx*is a solver-dependent function that estimates the state derivative.*h*is the step size.*n*indicates the current time step.

Simulink provides a set of fixed-step continuous explicit solvers. The solvers
differ in the specific numerical integration technique that they use to compute the
state derivatives of the model. This table lists each solver and the integration
technique it uses. The table lists the solvers in the order of the computational
complexity of the integration methods they use, from the least complex
(`ode1`

) to the most complex (`ode8`

).

Solver | Integration Technique | Order of Accuracy |
---|---|---|

| Euler's method | First |

| Heun's method | Second |

| Bogacki-Shampine formula | Third |

| Fourth-order Runge-Kutta (RK4) formula | Fourth |

| Dormand-Prince (RK5) formula | Fifth |

| Dormand-Prince RK8(7) formula | Eighth |

None of these solvers have an error control mechanism. Therefore, the accuracy and the duration of a simulation depend directly on the size of the steps taken by the solver. As you decrease the step size, the results become more accurate, but the simulation takes longer. Also, for any given step size, the higher the order of the solver, the more accurate the simulation results.

If you specify a fixed-step solver type for a model, then by default, Simulink selects the `FixedStepAuto`

solver. Auto solver then
selects an appropriate fixed-step solver that can handle both continuous and
discrete states with moderate computational effort. As with the discrete solver, if
the model has discrete rates (sample times), then Simulink sets the step size to the fundamental sample time of the model by
default. If the model has no discrete rates, Simulink automatically uses the result of dividing the simulation total
duration by 50. Consequently, the solver takes a step at each simulation time at
which Simulink must update the discrete states of the model at its specified sample
rates. However, it does not guarantee that the default solver accurately computes
the continuous states of a model. Therefore, you may need to choose another solver,
a different fixed step size, or both to achieve acceptable accuracy and an
acceptable simulation time.

#### Fixed-Step Continuous Implicit Solvers

An implicit solver computes the state at the next time step as an implicit function of the state at the current time step and the state derivative at the next time step, as described by the following expression.

$$x(n+1)-x(n)-h\ast Dx(n+1)=0$$

Simulink provides one fixed-step implicit solver: `ode14x`

.
This solver uses a combination of Newton's method and extrapolation from the current
value to compute the value of a state at the next time step. You can specify the
number of Newton's method iterations and the extrapolation order that the solver
uses to compute the next value of a model state. See Fixed-step size (fundamental sample time). The more
iterations and the higher the extrapolation order that you select, the greater the
accuracy you obtain. However, you simultaneously create a greater computational
burden per step size.