Main Content

Create Custom Functionality Using MATLAB Function Blocks

This example shows how to customize a model that uses the MATLAB Function block to calculate the mean and standard deviation for a vector of values.

Open the Model

The model call_stats_block1 includes an empty MATLAB Function block and the blocks you need for the example. Open the model to start.

Program the MATLAB Function Block

Program the block to calculate the mean and standard deviation for a vector of values:

  1. To open the MATLAB Function Block Editor, double-click the MATLAB Function block. A default function appears in the MATLAB Function Block Editor with one input and output argument.

    this image shows the MATLAB Function Block Editor after it has been opened from the call_stats_block1 model. It includes a default function.

  2. Define the function inputs and outputs by editing the function declaration statement:

    function [mean, stdev] = stats(vals)
    

    From this code, you define a function called stats, which calculates a statistical mean and standard deviation for the values in the vector vals. The function declaration statement declares vals as an argument to the stats function, with mean and stdev as return values.

  3. In the MATLAB Function Block Editor, enter a line space after the function declaration statement and add the following code:

    % Calculates a statistical mean and a standard
    % deviation for the values in vals.
    
    len = length(vals);
    mean = avg(vals,len);
    stdev = sqrt(sum(((vals-avg(vals,len)).^2))/len);
    plot(vals,'-+');
    
    function mean = avg(array,size)
    mean = sum(array)/size;
    
  4. Exit the block. The function outputs mean and stdev correspond to block outports mean and stdev and the function input vals corresponds to the block inport vals.

  5. Complete the connections to the MATLAB Function block as shown.

    This shows connected signals between the blocks established in the previous image.

  6. Save the model as call_stats_block2.

Build the Function and Check for Errors

After programming the block in a Simulink® model, you can build the function and test for errors. Building your MATLAB Function block requires a supported compiler. MATLAB® automatically selects one as the default compiler. If you have multiple MATLAB-supported compilers installed on your system, you can change the default compiler using the mex -setup command. See Change Default Compiler.

Supported Compilers for Simulation and Code Generation Builds

View a list of compilers for building models containing MATLAB Function blocks simulation and code generation.

  1. Navigate to the Supported and Compatible Compilers page and select your platform.

  2. Scroll to the table under Simulink Product Family.

  3. To check the table for models that contain MATLAB Function blocks for simulation, find the compilers checked in the column titled Simulink For Model Referencing, Accelerator mode, Rapid Accelerator mode, and MATLAB Function blocks.

    To check the table for models that contain MATLAB Function blocks and generate code, find the compilers checked in the column titled Simulink Coder™ .

Supported Compilers for Code Generation

To generate code for models that contain MATLAB Function blocks, you can use any of the C compilers supported by Simulink software for code generation with Simulink Coder. For a list of these compilers:

  1. Navigate to the Supported and Compatible Compilers Web page.

  2. Select your platform.

  3. In the table for Simulink and related products, find the compilers checked in the column titled Simulink Coder.

Locate and Fix Errors

If errors occur during the build process, the Diagnostics Viewer window lists the errors with links to the offending code.

The following exercise shows the way to locate and fix an error in a MATLAB Function block.

  1. In the stats function, change the local function avg to a fictitious local function aug and then compile again to see the following messages in window. The Diagnostics Viewer window displays each detected error with a shaded red line.

  2. Investigate the error titled Undefined function or variable 'aug'. In the diagnostic message for the selected error, click the blue link after the function name to display the offending code. The offending line appears highlighted in the MATLAB Function Block Editor.

  3. The message also links to a report about compile-time type information for variables and expressions in your MATLAB functions. This information helps you diagnose error messages and understand type propagation rules. For more information about the report, see MATLAB Function Reports. To see the report, click the highlighted blue link in the line called Launch diagnostic report.

  4. Correct the error by changing aug back to avg and recompile.

Define Input and Output Properties

Each function argument in MATLAB Function blocks can have a unique data type that is a scalar, vector, or matrix. However, creating the function arguments does not directly specify their data type. By default, function inputs and outputs inherit their data type and size from the signals attached to their ports. Examine input and output data for the MATLAB Function block to verify that it inherits the correct type and size.

  1. Double-click the MATLAB Function block stats.

  2. In the MATLAB Function Block Editor, click Ports & Data Manager. The Ports and Data Manager opens to help you define arguments for MATLAB Function blocks.

    The left pane displays the argument vals and the return values mean and stdev that you have already created for the MATLAB Function block. Observe that vals is assigned a Scope of Input, which is short for Input from Simulink. mean and stdev are assigned the Scope of Output, which is short for Output to Simulink.

  3. In the left pane of the Ports and Data Manager, click anywhere in the row for vals to highlight it.

    The right pane displays the Data properties dialog box for vals. By default, the class, size, units, and complexity of input and output arguments are inherited from the signals attached to each input or output port. Inheritance is specified by setting Size to -1, Complexity to Inherited, and Type to Inherit: Same as Simulink.

    The actual inherited values for size and type are set during model compilation, and are reported in the Compiled Type and Compiled Size columns of the left pane.

    You can specify the type of input or output argument in the Type field of the Data properties dialog box, for example, double. You can also specify the size of an input or output argument by entering an expression in the Size field. For example, you can enter [2 3] in the Size field to specify vals as a 2-by-3 matrix. For more information, see Define and Modify Function Argument Types and Specify Size of MATLAB Function Block Data.

    Note

    The default first index for any arrays that you add to a MATLAB Function block function is 1, just as it would be in MATLAB.

Configure MATLAB Function Blocks Programmatically

There are two programmatic approaches for configuring a MATLAB Function block:

  • Use a MATLABFunctionConfiguration object to query and modify the properties of the block. You can identify the block in your model by using a block path or calling the gcb function.

  • Use a Stateflow.EMChart object to access the inputs, outputs, and properties of the block. Identify the block in your model by navigating the hierarchy of Stateflow® API objects.

Configure Block Properties

Consider the model call_stats_block1 described in the previous example. You can access the MATLABFunctionConfiguration object for the MATLAB Function block in this model by calling the get_param function:

config = get_param('call_stats_block1/MATLAB Function', ...
    'MATLABFunctionConfiguration');

To query or modify the properties in your configuration object, use dot notation with your object name:

myConfig.UpdateMethod
ans =

  'Inherited'
config.Description = 'Calculate the mean and standard deviation for a vector of values.';

To learn more about the properties you can modify in your MATLAB Function configuration object, see MATLABFunctionConfiguration.

Access Block Inputs, Outputs, and Properties

For greater programmatic control of your MATLAB Function block, access its Stateflow.EMChart object by calling the find (Stateflow) function for the Simulink.Root object at the top level of the Stateflow hierarchy of objects.

rt = sfroot;
block = find(rt,'-isa','Stateflow.EMChart', ...
    'Path','call_stats_block1/MATLAB Function');

To query or modify the properties in your configuration object, use dot notation with your object name:

block.ChartUpdate
ans =

  'INHERITED'
block.Description = 'Calculate the mean and standard deviation for a vector of values.';

The Stateflow.EMChart object gives you access to additional properties that are not available in the MATLABFunctionConfiguration object. For example, to create a table of the inputs and outputs of the block, enter:

info = get([block.Inputs;block.Outputs],{'Name','Scope','Port'});
T = table(info(:,2),cell2mat(info(:,3)), ...
    'VariableNames',{'Scope','Port'}, ...
    'RowNames',info(:,1));
T.Scope = categorical(T.Scope)
T =

  3×2 table

             Scope     Port
             ______    ____

    vals     Input      1  
    mean     Output     1  
    stdev    Output     2  

For more information, see Overview of the Stateflow API (Stateflow).

Define Local Variables for Code Generation

To generate code from the MATLAB algorithm in a MATLAB Function block, you must explicitly assign the class, size, and complexity of local variables before using them in operations or returning them as outputs (see Data Definition for Code Generation). In the example function stats, the local variable len is defined before being used to calculate mean and standard deviation:

len = length(vals);

Once you assign properties to a variable, you cannot redefine its class, size, or complexity elsewhere in the function body with some exceptions (see Reassignment of Variable Properties).

Generate Code for the MATLAB Function Block

  1. Open the call_stats_block2 model that you saved at the end of Program the MATLAB Function Block.

  2. Double-click stats block.

  3. Open the Simulink Coder app.

  4. On the C Code tab, Build to compile and build the example model.

    If you get an error related to the Variable-step solver, from Configuration Parameters > Solver, change the solver type to a Fixed-step solver and rerun the build. To learn more about the differences between fixed-step and variable-step solvers, see Fixed-Step Versus Variable-Step Solvers.

    If no errors occur, the Diagnostics Viewer window displays a message indicating success. Otherwise, this window helps you locate errors, as described in Locate and Fix Errors.

See Also

| | | | | | |

Related Topics