The Satellite Link Budget Analyzer app is an interactive tool for creating, configuring, analyzing, and visualizing link budgets for satellite communications. This section describes the some of the app features. For more information and examples that demonstrate use of the app, see the Satellite Link Budget Analyzer documentation page.
On the Apps tab in the MATLAB® Toolstrip, under Signal Processing and
Communications, click the app icon. . Alternatively, you can open the app by entering
satelliteLinkBudgetAnalyzer at the MATLAB command prompt.
The app opens to show the BUDGET ANALYZER toolstrip and docked tabs. The BUDGET ANALYZER toolstrip contains FILE, CUSTOMIZE, and ANALYZE ribbons. The default main work area tabs are arranged to shown the link canvas, entity (ground station, link, and satellite) properties, results, and plots. You can move the tabbed panes by dragging to rearrange as desired.
In the Link Canvas pane, you can select an individual ground station, link, or satellite entity to bring it into focus in the associated property pane. The default canvas defines these three satellite communication links.
Link L1 is an uplink between ground station G1 and satellite S1
Link L3 is an crosslink between satellite S3 and satellite S4
Link L2 is a downlink between satellite S2 and ground station G2
Select the Ground Station, Link, or Satellite tab to view the pane and adjust settings of the input properties for each type of entity. Select the entity of interest in the Link Canvas tab to bring focus on that entity in the associated property tab. You can adjust the property settings for the entity in focus only.
When you click Analyze, the link budget results are computed and displayed in the Link Budget pane. The factory default results compute distance, elevation, transmit effective radiated power (EIRP), polarization loss, free-space pathloss (FSPL), received isotropic power, carrier-to-receiver-noise-density ratio (C/N0), received Eb/N0, and overall link margin.
Click the Customize Input/Output button to open the view or customize the configured input properties and output computations.
View free-space pathloss in 2-D line plots and link margins in 2-D contour plots that characterize the links. When opened the app shows the default scenario, including link budget results and these plots:
Free-space pathloss in a 2-D line plot labeled FSPL
Link margin for links L1, L2, and L3 in individual 2-D contour plots labeled Margin - L1, Margin - L2, and Margin - L3, respectively
On the BUDGET ANALYZER toolstrip, click the Customize Input/Output button to open the CUSTOMIZE INPUT/OUTPUT toolstrip. The CUSTOMIZE INPUT/OUTPUT toolstrip enables you to review, add, delete, and customize the properties for entity and the formulas for the computation of results.
In the ADD NEW PROPERTY ribbon you can customize the app by defining and adding new properties.
In the ADD NEW RESULT ribbon you can customize the app by defining new formulas and adding them as new results.
In the Properties pane, you can adjust or delete properties.
In the Results pane you can adjust or delete results.