Perform statistical analysis of instantaneous flicker level signal
power_flicker opens a tool that computes
the short-term flicker severity (Pst) and long-term flicker severity
(Plt) and displays the cumulative probability function (CPF) of an
instantaneous flicker level signal (S5 signal).
You must have a Control System Toolbox™ license to use the
Load the S5 signal into the tool. Choose between From file and From workspace. The default value is From workspace.
- 10 minutes Short-term interval (IEC standard)
When this parameter is selected, the short-term interval observation period is set to 10 minutes (600 seconds). This setting corresponds to the time specified in the IEC 61000-4-15 standard. This parameter is selected by default.
- Short-term interval Tshort (s)
Specify the short-term interval observation period, in seconds. This parameter is dimmed when the 10 minutes Short-term interval parameter (IEC standard) parameter is selected. The default value is 600.
- Long-term interval (N x Tshort) N:
Specify the number of 10-minute intervals used by the tool to measure the long-term flicker severity (Plt). The default value is
- Start time (s)
Specify the time, in seconds, of the beginning of the observed period. The default value is
- Number of classes
Specify the number of classes, which are used by the tool to compute the cumulative probability function of the instantaneous flicker level. The default value is
Compute the percentiles P0.1s, P1s, P3s, P10s, and P50s, which are the flicker levels exceeded for 0.1%, 1%, 3%, 10%, and 50% of the time during the observed period. Computes the short-term flicker severity (Pst) and long-term flicker severity (Plt) and displays the cumulative probability function (CPF) of the S5 signal.