FMCW Range Estimation
The purpose of FMCW range estimation is to estimate the range of a target. For example, a radar for collision avoidance in an automobile needs to estimate the distance to the nearest obstacle. FMCW range estimation algorithms can vary in the details, but the typical high-level procedure is as follows:
Dechirp — Dechirp the received signal by mixing it with the transmitted signal. If you use the
dechirpfunction, the transmitted signal is the reference signal.
Find beat frequency — From the dechirped signal, extract the beat frequency or pair of beat frequencies. If the FMCW signal has a sawtooth shape (up-sweep or down-sweep sawtooth shape), you extract one beat frequency. If the FMCW signal has a triangular sweep, you extract up-sweep and down-sweep beat frequencies.
Extracting beat frequencies can use a variety of algorithms. For example, you can use the following features to help you perform this step:
Compute range — Use the beat frequency or frequencies to compute the corresponding range value. The
beat2rangefunction can perform this computation.
While developing your algorithm, you might also perform these auxiliary tasks:
Visualize targets in the range-Doppler domain, using the
Determine whether you need to compensate for range-Doppler coupling. Such coupling can occur if the target is moving relative to the radar. You can use the
rdcouplingfunction to compute the range offset due to range-Doppler coupling. If the range offset is not negligible, common compensation techniques include:
Subtracting the range offset from your initial range estimate
Having the FMCW signal use a triangle sweep instead of an up sweep or down sweep
Explore the relationships among your system’s range requirements and parameters of the FMCW waveform. You can use these functions:
- Automotive Adaptive Cruise Control Using FMCW Technology (Radar Toolbox)