DurationRuler Properties
Control axis with duration values
DurationRuler
properties control the
appearance and behavior of an x-axis, y-axis,
or z-axis that shows duration values. Each individual axis has its
own ruler object. By changing property values of the ruler, you can modify certain
aspects of a specific axis.
Use dot notation to refer to a particular ruler and property. Access the ruler objects
through the XAxis
, YAxis
, and
ZAxis
properties of the Axes
object.
ax = gca; co = ax.XAxis.Color; ax.XAxis.Color = 'blue';
Appearance
Color
— Color of axis line and labels
RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Color of the axis line and labels, specified as an RGB triplet, a hexadecimal color code, a color name, or a short name.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB® uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Note
The Color
property for the ruler and the associated
XColor
, YColor
, or
ZColor
property for the parent axes always have the same
value. Setting one also sets the other.
LineWidth
— Width of axis line and tick marks
0.5
(default) | positive value
Width of axis line and tick marks, specified as a positive value in point units. One point equals 1/72 inch.
Example: ax.XAxis.LineWidth = 2;
Note
Setting the LineWidth
property for the parent
axes sets the LineWidth
property for the ruler
to the same value. However, setting the ruler property does not set
the axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
Label
— Axis label
text object (default)
Axis label, which is a text object. To display text or change
existing text, set the String
property for the
text object. Use other properties to change the text appearance, such
as the font style or color.
ax = gca;
ax.XAxis.Label.String = 'X Axis';
ax.XAxis.Label.FontSize = 12;
For a full list of options, see Text Properties.
Alternatively, add or modify the axis labels using the xlabel
, ylabel
,
and zlabel
functions.
Note
The text object is not a child of the ruler object, so it cannot be returned by
findobj
and it does not use the default text property values.The text object stored in this property is the same as the text object stored in the parent object’s label property. Thus, you can modify the text object using either the ruler or the parent object’s property. For example, setting the font size on a text object stored in an x-axis ruler’s
Label
property is the same as setting the font size on the text object stored in theXLabel
property of the parent axes.
LabelHorizontalAlignment
— Axis label horizontal alignment
'center'
(default) | 'left'
| 'right'
Axis label horizontal alignment, specified as one of the values from the table.
LabelHorizontalAlignment Value | Description | Appearance |
---|---|---|
'center' | For a horizontal axis, the label is centered between the left and right edges of the plot box. For a vertical axis, the label is centered between the top and bottom edges of the plot box. |
|
'left' | For a horizontal axis, the label is aligned with the left edge of the plot box. For a vertical axis, the label is aligned with the bottom edge of the plot box. |
|
'right' | For a horizontal axis, the label is aligned with the right edge of the plot box. For a vertical axis, the label is aligned with the top edge of the plot box. |
|
Visible
— Axis visibility
'on'
(default) | on/off logical value
Axis visibility, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display the axis.'off'
— Hide the axis without deleting it. You still can access properties of an invisible axis using the ruler object.
Example: ax.XAxis.Visible = 'off';
Scale and Direction
Limits
— Minimum and maximum axis limits
two-element vector of the form [min max]
Minimum and maximum axis limits, specified as a two-element vector of the
form [min max]
, where min
and
max
are duration values. For
example:
d = duration(1,40:45,0); y = rand(6,1); plot(d,y) ax = gca; ax.XAxis.Limits = [d(2) d(5)];
You can specify both limits, or specify one limit and let the ruler
automatically calculate the other using an Inf
or
-Inf
duration value, such as
days(Inf)
.
Alternatively, set the limits using the xlim
, ylim
, and zlim
functions.
If you assign a value to this property, then MATLAB sets the associated mode to
'manual'
.
Note
The Limits
property for the ruler and the
associated XLim
, YLim
, or
ZLim
property for the parent axes always have
the same value. Setting one also sets the other.
LimitsMode
— Selection mode for Limits
property
'auto'
(default) | 'manual'
Selection mode for the Limits
property, specified
as one of these values:
'auto'
— Automatically select the axis limits based on the data plotted.'manual'
— Use axis limit values that you specify. To specify the axis limits, set theLimits
property.
Note
The LimitsMode
property for the ruler and
the associated XLimMode
, YLimMode
,
or ZLimMode
property for the parent axes always
have the same value. Setting one also sets the other.
Scale
— Scale of values along axis
'linear'
(default)
Scale of values along axis, returned as 'linear'
.
DurationRuler
objects do not support
log scales.
Direction
— Direction of increasing values
'normal'
(default) | 'reverse'
Direction of increasing values, specified as one of these values:
'normal'
— Values increase from left to right or bottom to top.'reverse'
— Values increase from right to left or top to bottom.
Note
The Direction
property for the ruler and
the associated XDir
, YDir
, or ZDir
property
for the parent axes always have the same value. Setting one also sets
the other.
Example: ax.XAxis.Direction = 'reverse';
Tick Values and Labels
TickValues
— Tick mark locations along the axis
[]
(default) | vector of duration values
Tick mark locations along the axis, specified as a vector of duration values. For example:
d = duration(1,40:45,0); y = rand(6,1); plot(d,y) ax = gca; ax.XAxis.TickValues = [d(1) d(3) d(5)];
If you assign a value to this property, then MATLAB sets the TickValuesMode
property to
'manual'
.
Alternatively, use the xticks
, yticks
, and zticks
functions.
Note
The TickValues
property for the ruler and the
associated XTick
, YTick
, or
ZTick
property for the parent axes always have
the same value. Setting one also sets the other.
TickValuesMode
— Selection mode for TickValues
property
'auto'
(default) | 'manual'
Selection mode for the TickValues
property,
specified as one of these values:
'auto'
— Automatically select the tick values based on the data plotted.'manual'
— Use tick values that you specify. To specify the values, set theTickValues
property.
Note
The TickValuesMode
property for the ruler
and the associated XTickMode
, YTickMode
,
or ZTickMode
property for the parent axes always
have the same value. Setting one also sets the other.
Exponent
— Exponential notation common to all tick values
integer value
Exponential notation common to all tick values, specified as an integer
value. The Exponent
property applies only to tick labels
that show a single unit of time, such as seconds, minutes, or hours. It does
not apply to tick labels that show mixed units of time. When applicable, the
ruler displays an exponent label showing the base and exponent value.
The base value is always 10. You can change the exponent value by setting
the Exponent
property. If the exponent value is
0
, then the exponent label is not displayed.
For example, this code changes the exponent value to 8.
x = hours((1:10)*1e10); plot(x,1:10) ax = gca; ax.XAxis.Exponent = 8;
If you assign a value to this property, then MATLAB sets the ExponentMode
property to
'manual'
.
ExponentMode
— Selection mode for Exponent
property
'auto'
(default) | 'manual'
Selection mode for the Exponent
property, specified as
one of these values:
'auto'
— Automatically select the exponent value based on the axis limits.'manual'
— Use an exponent value that you specify. To specify the value, set theExponent
property.
TickLabels
— Tick mark labels
''
(default) | cell array of character vectors | string array | categorical array
Tick mark labels, specified as a cell array of character vectors, string array, or categorical
array. If you do not specify enough labels for all of the tick values, then the labels
repeat. The labels support TeX and LaTeX markup. See the
TickLabelInterpreter
property for more information.
Example: ax.XAxis.TickLabels = {'January','February','March','April','May'}';
Example: ax.YAxis.TickLabels = {'\pi','2\pi','3\pi'}'
If you set this property, then MATLAB sets the TickLabelsMode
property
to 'manual'
.
Alternatively, specify the tick labels using the xticklabels
, yticklabels
,
and zticklabels
functions.
Note
If you specify this property as a categorical array, MATLAB uses the values in the array, not the categories.
The
TickLabels
property for the ruler and the associatedXTickLabel
,YTickLabel
, orZTickLabel
property for the parent axes always have the same value. Setting one also sets the other.
Data Types: char
| string
| categorical
TickLabelsMode
— Selection mode for TickLabels
property
'auto'
(default) | 'manual'
Selection mode for the TickLabels
property,
specified as one of these values:
'auto'
— Automatically select the tick labels.'manual'
— Use tick labels that you specify. To specify the labels, set theTickLabels
property.
Note
The TickLabelsMode
property for the ruler
and the associated XTickLabelMode
, YTickLabelMode
,
or ZTickLabelMode
property for the parent axes
always have the same value. Setting one also sets the other.
TickLabelColor
— Tick label color
[0.15 0.15 0.15]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Tick label color, specified as an RGB triplet, a hexadecimal color code, a color name, or a short name.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Note
Setting the ruler’s Color
property also sets the
TickLabelColor
property to the same value. However, setting
the TickLabelColor
property does not change the
Color
property. To prevent the Color
property value from overriding the TickLabelColor
property
value, set the Color
property first, and then set the
TickLabelColor
property.
TickLabelInterpreter
— Tick label interpreter
'tex'
(default) | 'latex'
| 'none'
Tick label interpreter, specified as one of these values:
'tex'
— Interpret characters using a subset of TeX markup.'latex'
— Interpret characters using LaTeX markup. When you specify the tick labels, use dollar signs around each element in the cell array.'none'
— Display literal characters.
Note
Setting the TickLabelInterpreter
property for the parent axes
sets the TickLabelInterpreter
property for the ruler to the same
value. However, setting the ruler property does not set the axes property. To
prevent the axes property value from overriding the ruler property value, set the
axes value first, and then set the ruler value.
TeX Markup
By default, MATLAB supports a subset of TeX markup. Use TeX markup to add superscripts and subscripts, modify the text type and color, and include special characters in the text.
Modifiers remain in effect until the end of the text.
Superscripts and subscripts are an exception because they modify only the next character or the
characters within the curly braces. When you set the interpreter to 'tex'
,
the supported modifiers are as follows.
Modifier | Description | Example |
---|---|---|
^{ } | Superscript | 'text^{superscript}' |
_{ } | Subscript | 'text_{subscript}' |
\bf | Bold font | '\bf text' |
\it | Italic font | '\it text' |
\sl | Oblique font (usually the same as italic font) | '\sl text' |
\rm | Normal font | '\rm text' |
\fontname{ | Font name — Replace
with the name of
a font family. You can use this in combination with other modifiers. | '\fontname{Courier} text' |
\fontsize{ | Font size —Replace
with a numeric
scalar value in point units. | '\fontsize{15} text' |
\color{ | Font color — Replace
with one of
these colors: red , green ,
yellow , magenta ,
blue , black ,
white , gray ,
darkGreen , orange , or
lightBlue . | '\color{magenta} text' |
\color[rgb]{specifier} | Custom font color — Replace
with a
three-element RGB triplet. | '\color[rgb]{0,0.5,0.5} text' |
This table lists the supported special characters for the
'tex'
interpreter.
Character Sequence | Symbol | Character Sequence | Symbol | Character Sequence | Symbol |
---|---|---|---|---|---|
| α |
| υ |
| ~ |
| ∠ |
| ϕ |
| ≤ |
|
|
| χ |
| ∞ |
| β |
| ψ |
| ♣ |
| γ |
| ω |
| ♦ |
| δ |
| Γ |
| ♥ |
| ϵ |
| Δ |
| ♠ |
| ζ |
| Θ |
| ↔ |
| η |
| Λ |
| ← |
| θ |
| Ξ |
| ⇐ |
| ϑ |
| Π |
| ↑ |
| ι |
| Σ |
| → |
| κ |
| ϒ |
| ⇒ |
| λ |
| Φ |
| ↓ |
| µ |
| Ψ |
| º |
| ν |
| Ω |
| ± |
| ξ |
| ∀ |
| ≥ |
| π |
| ∃ |
| ∝ |
| ρ |
| ∍ |
| ∂ |
| σ |
| ≅ |
| • |
| ς |
| ≈ |
| ÷ |
| τ |
| ℜ |
| ≠ |
| ≡ |
| ⊕ |
| ℵ |
| ℑ |
| ∪ |
| ℘ |
| ⊗ |
| ⊆ |
| ∅ |
| ∩ |
| ∈ |
| ⊇ |
| ⊃ |
| ⌈ |
| ⊂ |
| ∫ |
| · |
| ο |
| ⌋ |
| ¬ |
| ∇ |
| ⌊ |
| x |
| ... |
| ⊥ |
| √ |
| ´ |
| ∧ |
| ϖ |
| ∅ |
| ⌉ |
| 〉 |
| | |
| ∨ |
| 〈 |
| © |
LaTeX Markup
To use LaTeX markup, set the TickLabelInterpreter
property to
'latex'
. Use dollar symbols around the labels, for example,
use '$\int_1^{20} x^2 dx$'
for inline mode or
'$$\int_1^{20} x^2 dx$$'
for display mode.
The displayed text uses the default LaTeX font style. The
FontName
, FontWeight
, and
FontAngle
properties do not have an effect. To change the
font style, use LaTeX markup within the text. The maximum size of the text that you
can use with the LaTeX interpreter is 1200 characters. For multiline text, the
maximum size of the text reduces by about 10 characters per line.
For examples that use TeX and LaTeX, see Greek Letters and Special Characters in Chart Text. For more information about the LaTeX system, see The LaTeX Project website at https://www.latex-project.org/.
TickLabelFormat
— Tick label format
character vector | string scalar
Tick label format, specified as a character vector or string scalar.
To display a duration as a single number that includes a fractional part (for example, 1.234 hours), specify one of the following formats.
Format | Description |
---|---|
'y' | Number of exact, fixed-length years. A fixed-length year is equal to 365.2425 days. |
'd' | Number of exact, fixed-length days. A fixed-length day is equal to 24 hours. |
'h' | Number of hours |
'm' | Number of minutes |
's' | Number of seconds |
To display a duration in the form of a digital timer, specify one of these formats:
'dd:hh:mm:ss'
'hh:mm:ss'
'mm:ss'
'hh:mm'
In addition, you can display up to nine fractional second
digits by appending up to nine S
characters. For example,
'hh:mm:ss.SSS'
displays the milliseconds of a
duration value to three digits.
TickLabelRotation
— Rotation of tick labels
scalar value in degrees
Rotation of tick labels, specified as a scalar value in degrees. Positive values give counterclockwise rotation. Negative values give clockwise rotation.
Alternatively, you can rotate the tick labels using the xtickangle
, ytickangle
,
and ztickangle
functions.
Note
The TickLabelRotation
property for the ruler
and the associated XTickLabelRotation
, YTickLabelRotation
,
or ZTickLabelRotation
property for the parent axes
always have the same value. Setting one also sets the other.
Example: ax.XAxis.TickLabelRotation = 45;
Example: ax.YAxis.TickLabelRotation = -45;
TickLabelRotationMode
— Selection mode for TickLabelRotation
property
'auto'
(default) | 'manual'
Selection mode for the TickLabelRotation
property, specified as one of
these values:
'auto'
— Automatically select the tick label rotation.'manual'
— Use a tick label rotation that you specify. To specify the rotation, set theTickLabelRotation
property.
Note
The TickLabelRotationMode
property for the ruler and the
corresponding mode property of the parent axes always have the same value.
Setting one also sets the other.
TickDirection
— Tick mark direction
'in'
(default) | 'out'
| 'both'
| 'none'
Tick mark direction, specified as one of these values:
'in'
— Direct the tick marks inward from the axis lines. This is the default for 2-D views.'out'
— Direct the tick marks outward from the axis lines. This is the default for 3-D views.'both'
— Center the tick marks over the axis lines.'none'
— Do not display any tick marks.
If you assign a value to this property, then MATLAB sets
the TickDirectionMode
property to 'manual'
.
Note
Setting the TickDir
property for the parent
axes sets the TickDirection
property for the ruler
to the same value. However, setting the ruler property does not set
the axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
TickDirectionMode
— Selection mode for TickDirection
property
'auto'
(default) | 'manual'
Selection mode for the TickDirection
property,
specified as one of these values:
'auto'
— Automatically select the tick direction.'manual'
— Use a tick direction that you specify. To specify the tick direction, set theTickDirection
property.
TickLength
— Tick mark length
two-element vector
Tick mark length, specified as a two-element vector of the form [2Dlength
3Dlength]
. The first element is the tick mark length in
2-D views. The second element is the tick mark length in 3-D views.
Specify the values in units normalized relative to the longest axes
dimension.
Note
Setting the TickLength
property for the parent
axes sets the TickLength
property for the ruler
to the same value. However, setting the ruler property does not set
the axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
Example: ax.YAxis.TickLength = [0.02 0.035];
MinorTick
— Minor tick mark display
'off'
(default) | on/off logical value
Minor tick mark display, specified as 'on'
or 'off'
, or
as numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display minor tick marks between the major tick marks on the axis. This is the default value for an axis with a log scale. The space between the major tick marks determines the number of minor tick marks. If theMinorTickValues
property is set to empty[]
, then no minor tick marks appear. Specify the tick mark locations by setting theMinorTickValues
property.'off'
— Do not display minor tick marks. This is the default value for an axis with a linear scale.
Note
The MinorTick
property for the ruler and
the associated XMinorTick
, YMinorTick
,
or ZMinorTick
property for the parent axes always
have the same value. Setting one also sets the other.
Example: ax.XAxis.MinorTick = 'on';
MinorTickValues
— Minor tick mark locations
[]
(default) | vector of increasing values
Minor tick mark locations, specified as a vector of increasing duration values.
If you assign values to this property, then MATLAB sets the MinorTickValuesMode
property to
'manual'
.
MinorTickValuesMode
— Selection mode for MinorTickValues
property
'auto'
(default) | 'manual'
Selection mode for the MinorTickValues
property,
specified as one of these values:
'auto'
— Use automatically calculated minor tick values.'manual'
— Use minor tick values that you specify. To specify the values, set theMinorTickValues
property.
Font
FontName
— Font name
system supported font name | 'FixedWidth'
Font name, specified as a system supported font name or 'FixedWidth'
.
The default font depends on the specific system and locale. To use
a fixed-width font that renders well, specify 'FixedWidth'
.
The actual fixed-width font used depends on the FixedWidthFontName
property
of the root object.
Note
Setting the FontName
property for the parent
axes sets the FontName
property for the ruler to
the same value. However, setting the ruler property does not set the
axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
Example: ax.XAxis.FontName = 'Cambria';
FontSize
— Font size
scalar numeric value
Font size, specified as a scalar numeric value. The default font size depends on the specific operating system and locale.
Note
Setting the
FontSize
property for the parent axes sets theFontSize
property for the ruler to the same value. However, setting the ruler property does not set the axes property. To prevent the axes property value from overriding the ruler property value, set the axes value first, and then set the ruler value.Setting the
FontSize
property on the ruler changes the size of the tick labels. MATLAB also updates the font size of the corresponding axes label using theLabelFontSizeMultiplier
of the parent axes. For example, setting the font size of an x-axis ruler to12
sets the font size for theXLabel
property of the parent axes to12
times the value of theLabelFontSizeMultiplier
property.
Example: ax.XAxis.FontSize = 12;
FontWeight
— Thickness of text characters
'normal'
(default) | 'bold'
Thickness of the text characters, specified as one of these values:
'normal'
— Default weight as defined by the particular font.'bold'
— Thicker character outlines than normal.
MATLAB uses the FontWeight
property
to select a font from those available on your system. Not all fonts
have a bold font weight. Therefore, specifying a bold font weight
still can result in the normal font weight.
Note
Setting the FontWeight
property for the parent
axes sets the FontWeight
property for the ruler
to the same value. However, setting the ruler property does not set
the axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
Example: ax.XAxis.FontWeight = 'bold';
FontAngle
— Text character slant
'normal'
(default) | 'italic'
Character slant, specified as 'normal'
or 'italic'
.
Not all fonts have both font styles. Therefore, the italic font can
look the same as the normal font.
Note
Setting the FontAngle
property for the parent
axes sets the FontAngle
property for the ruler
to the same value. However, setting the ruler property does not set
the axes property. To prevent the axes property value from overriding
the ruler property value, set the axes value first, and then set the
ruler value.
Example: ax.XAxis.FontAngle = 'italic';
FontSmoothing
— Text antialiasing
'on'
(default) | on/off logical value
Text smoothing, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Enable text antialiasing to reduce the jagged appearance of text characters and make the text easier to read. In certain cases, smoothed text blends against the background color and can make the text appear blurry.'off'
— Disable text antialiasing. Use this setting if the text seems blurry.
Note
Setting the
FontSmoothing
property for the parent axes sets theFontSmoothing
property for the ruler to the same value. However, setting the ruler property does not set the axes property. To prevent the axes property value from overriding the ruler property value, set the axes value first, and then set the ruler value.The
FontSmoothing
property will have no effect in a future release. Font smoothing will be enabled regardless of the value of the property.
Example: ax.XAxis.FontSmoothing = 'off';
Callbacks
LimitsChangedFcn
— Axis limits changed callback
''
(default) | function handle | cell array | character vector
Axis limits changed callback, specified as one of these values:
A function handle.
A cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
A character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
This callback executes after the axis limits have changed, either programmatically or using an interaction such as panning within the axes. It can also execute if MATLAB changes the axis limits to encompass the range of your data when you call a plotting function.
This callback function can access specific information about the axis limits. MATLAB passes this information in a LimitsChanged
object as the second argument to your callback function. If
you are developing an app in App Designer, the argument is called
event
. You can query the object properties using dot notation.
For example, event.NewLimits
returns the new axis limits. The
LimitsChanged
object is not available to callback
functions specified as character vectors.
The following table lists the properties of the LimitsChanged
object.
Property | Description |
---|---|
Source | Ruler object that executes the callback |
EventName |
|
OldLimits | Two-element vector containing the previous axis limits |
NewLimits | Two-element vector containing the new axis limits |
For more information about writing callbacks in apps, see Callbacks in App Designer.
Parent/Child
Parent
— Ruler parent
Axes
object
Ruler parent, specified as an Axes
object.
Note
Ruler objects are not listed in the Children
property
of the parent Axes
object.
Children
— Ruler children
empty GraphicsPlaceholder
array
The ruler has no children. You cannot set this property.
Version History
Introduced in R2016bR2022a: The FontSmoothing
property will have no effect in a future release
The FontSmoothing
property will have no effect in a future release. Font
smoothing will be enabled regardless of the value of the property.
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)