Stop bits

Number of Stop bits used to indicate end of a packet

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / SCI0, SCI2, SCI3, SCI4, SCI5, SCI6, and SCI7

Description

The Stop bits parameter selects the number of Stop bits used to indicate end of a packet.

Settings

1 | 0.5 | 1.5 | 2

0.5, 1.5, 2

Select the number of Stop bits used to indicate end of a packet.

  • 0.5 — The stop bit is transferred for 50% of the normal time used to transfer 1 bit.

  • 1 — One stop bit is transmitted to indicate the end of a byte.

  • 1.5 — The stop bit is transferred for 150% of the normal time used to transfer 1 bit.

  • 2 — Two stop bits are transmitted to indicate the end of a byte.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also

| |