Configure other interrupt

Configure other interrupt parameters

Since R2024b

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / FDCAN1, FDCAN2 and FDCAN3

Description

Select this parameter to configure other interrupt parameters such as timestamp wraparound, message RAM access failure, timeout occurred, error logging overflow, warning status, error passive status, bus-off status, watchdog event, arbitration protocol error, data protocol error, reserved address access.

Settings

off

Select this parameter to configure other interrupt parameters such as timestamp wraparound, message RAM access failure, timeout occurred, error logging overflow, warning status, error passive status, bus-off status, watchdog event, arbitration protocol error, data protocol error, reserved address access.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2024b