Sport Utility Vehicle

Sport utility vehicle dimensions

Description

Sport Utility Vehicle is one of the vehicles that you can use within the 3D simulation environment. This environment is rendered using the Unreal Engine® from Epic Games®. The following diagram provides the dimensions of this vehicle. The height dimensions are with respect to the vertical ground plane. The length and width dimensions are with respect to the origin of the vehicle in the vehicle coordinate system. The origin is on the ground, at the geometric center of the vehicle. For more detailed views of these diagrams, see the Dimensions section.

To add this type of vehicle to the 3D simulation environment:

  1. Add a Simulation 3D Vehicle with Ground Following block to your Simulink® model.

  2. In this block, set the Type parameter to Sport utility vehicle.

Dimensions

expand all

Specify Sport Utility Vehicle Dimensions

When simulating a path planner in the 3D environment, the path planner must use a vehicle whose dimensions are consistent with one used in the 3D environment. To make these dimensions consistent, you can use a vehicleDimensions object.

Specify the dimensions of a Sport Utility Vehicle in a vehicleDimensions object. Units are in meters. For an example that uses this object in a path planner, see Visualize Automated Parking Valet Using 3D Simulation.

centerToFront = 1.422;
centerToRear  = 1.474;
frontOverhang = 0.991;
rearOverhang  = 0.939;
vehicleWidth  = 1.935;
vehicleHeight = 1.774;
vehicleLength = centerToFront + centerToRear + frontOverhang + rearOverhang;

suvDims = vehicleDimensions(vehicleLength,vehicleWidth,vehicleHeight, ...
    'FrontOverhang',frontOverhang,'RearOverhang',rearOverhang)
suvDims = 
  vehicleDimensions with properties:

           Length: 4.8260
            Width: 1.9350
           Height: 1.7740
        Wheelbase: 2.8960
     RearOverhang: 0.9390
    FrontOverhang: 0.9910
       WorldUnits: 'meters'