Number of scans acquired during operation
In the session-based interface, the
displays the number of scans acquired after you start the operation
The read-only value represents the number of scans acquired
by the hardware. This value is reset each time you call
Display Number of Scans Acquired
Acquire analog input data and display the number of scans acquired.
Create a session, add an analog input channel,
s = daq.createSession('ni'); ch = addAnalogInputChannel(s,'Dev1','ai1','voltage');
See how many scan the session had acquired.
ans = 0
Start the acquisition and see how many scans the session has acquired
ans = 1000