Setup for Tuning MATLAB Models
You can tune a control system that is represented in MATLAB by
a generalized state-space (
genss) model. Create
such a model by interconnecting elements that represent the fixed
and tunable components of your control system. See Building Tunable Models.
Model Tuned Elements
Model Analysis Points
- Building Tunable Models
Build a control-system model for tuning with
looptuneusing numeric LTI models for fixed elements and control design blocks for the tunable elements.
- Generalized Models
Generalized models represent systems having a mixture of fixed coefficients and tunable or uncertain coefficients.
- Models with Tunable Coefficients
Use tunable models to model tunable components of control systems for parameter sampling or control system tuning.
- Mark Signals of Interest for Control System Analysis and Design
Analysis points allow you to access to internal signals, perform open-loop analysis, or specify requirements for controller tuning in systems modeled in either MATLAB or Simulink®.