3DoF Animation

R2026b

Create 3-D MATLAB Graphics animation of three-degrees-of-freedom object

• 

3DoF Animation block

To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.

Libraries:
Aerospace Blockset / Animation / MATLAB-Based Animation

Description

The 3DoF Animation block displays a 3-D animated view of a three-degrees-of-freedom (3DoF) craft, its trajectory, and its target using MATLAB^® Graphics.

The 3DoF Animation block uses input values and dialog box parameters to create and display the animation.

This block does not produce deployable code, but you can use it with Simulink^® Coder™ external mode as a SimViewingDevice.

Ports

Input

x_tz_t — Target downrange position and altitude (positive down)

two-element vector

Downrange position and altitude (positive down) of the target, specified as a two-element vector.

Data Types: double

x_ez_e — Craft downrange position and altitude (positive down)

two-element vector

Downrange position and altitude (positive down) of the craft, specified as a two-element vector.

Data Types: double

θ — Attitude of craft

1-by-1 scalar

Attitude of the craft, specified as 1-by-1 scalar, in radians.

Data Types: double

Parameters

Axes limits [xmin xmax ymin ymax zmin zmax] — Axes limits

[0 5000 -2000 2000 -5050 -3050] (default) | six-element vector

Three-dimensional space to be viewed, specified as a six-element vector.

Programmatic Use

Block Parameter: u1

Type: character vector

Values: six-element vector

Default: '[0 5000 -2000 2000 -5050 -3050]'

Time interval between updates — Time interval

0.05 (default) | scalar

Time interval at which the animation is redrawn, specified as a double scalar.

Programmatic Use

Block Parameter: u2

Type: character vector

Values: double scalar

Default: '0.05'

Size of craft displayed — Scale factor

1.0 (default) | scalar

Scale factor to adjust the size of the craft and target, specified as a double scalar.

Programmatic Use

Block Parameter: u3

Type: character vector

Values: double scalar

Default: '1.0'

Enter view — Entrance view

Fixed position (default) | Cockpit | Fly alongside

Preset entrance views, specified as:

• Fixed position

• Cockpit

• Fly alongside

These preset views are specified by MATLAB Graphics parameters CameraTarget and CameraUpVector for the figure axes.

Tip

To customize the position and field of view for the selected view, use the Position of camera and View angle parameters.

Programmatic Use

Block Parameter: u5

Type: character vector

Values: Fixed position | Cockpit | Fly alongside

Default: 'Fixed position'

Position of camera [xc yc zc] — Camera position

[2000 500 -3150] (default) | three-element vector

Camera position, specified using the MATLAB Graphics parameter CameraPosition for the figure axes as a three-element vector. Used in all cases except for the Cockpit view.

Programmatic Use

Block Parameter: u6

Type: character vector

Values: three-element vector

Default: '[2000 500 -3150]'

View angle — View angle

10 (default) | scalar

View angle, specified as MATLAB Graphics parameter CameraViewAngle for the figure axes in degrees as a double scalar.

Programmatic Use

Block Parameter: u7

Type: character vector

Values: double scalar

Default: '10'

Enable animation — Display animation

on (default) | off

To display the animation during the simulation, select this check box. If not selected, the animation is not displayed.

Programmatic Use

Block Parameter: u8

Type: character vector

Values: on | off

Default: 'on'

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced before R2006a