Upcoming MATLAB and Simulink Webinars

Wireless standard waveform generation in MATLAB for simulation and testbeds


In this webinar, you will learn how to use new capabilities in MATLAB to test your standards-based wireless designs and implementations. You can generate standard-compliant signals for testing. Then, you can obtain expected performance metrics with link-level simulations that include channel modeling and RF front-end and receiver operations. You get in-depth insight into algorithms since these functions are offered as open MATLAB code. Finally, you can test and compare expected metrics with real-time results obtained through over-the-air testing with SDRs and RF instruments.


Through examples and case studies you will learn how to perform:

  • Waveform generation for wireless standards including (NR 5G candidate, LTE, Wi-Fi, NFC, ZigBee, NB-IoT, C-V2X)
  • Link-level simulations with RF front-end receiver operations and channel models including (Winner II, 38.901)
  • Verification of your design with tests and measurements including (EVM, BLER, PER, ACLR)
  • Radio connectivity and over-the-air testing with SDRs and RF instruments

Please allow approximately 45 minutes to attend the presentation and Q&A session. We will be recording this webinar, so if you can't make it for the live broadcast, register and we will send you a link to watch it on-demand.

About the Presenter

Dr. Houman Zarrinkoub is a senior product manager at MathWorks, based in Massachusetts, USA. During his 16 years at MathWorks he has also served as a development manager and has been responsible for multiple signal processing and communications software tools. Prior to MathWorks, he was a research scientist in the Wireless Group at Nortel Networks, where he contributed to multiple standardization projects for 3G mobile and voice coding technologies. He has been awarded multiple patents on topics related to computer simulations of signal processing applications. Houman is the author of the book Understanding LTE with MATLAB: From Mathematical Modeling to Simulation and Prototyping (Wiley, 2014). He holds a B.Sc. degree in electrical engineering from McGill University and M.Sc. and Ph.D. degrees in telecommunications from the Institut National de la Recherche Scientifique, in Canada.

Product Focus

Registration closed